PartsTable
Technical Data Sheet
Download PDF

595-6404642-10 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

595-6404642-10: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400, overall_width: 2.120 INCHES NOMINAL IN, overall_height: 1.000 INCHES NOMINAL IN, overall_length: 3.190 INCHES NOMINAL IN, mounting_hole_type: THREADED, mounting_hole_diameter: 0.130 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-419-5170, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
595-6404642-10
NSN: 5340-01-419-5170
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialNICKEL ALLOY 400
overall_width2.120 INCHES NOMINAL IN
overall_height1.000 INCHES NOMINAL IN
overall_length3.190 INCHES NOMINAL IN
mounting_hole_typeTHREADED
mounting_hole_diameter0.130 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
mounting_hole_quantity1
material_document_and_classificationQQ-N-281 CL A, FORM 1 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-419-5170
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 595-6404642-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 1
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 CL A, FORM 1 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.130 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
•
MATERIAL: NICKEL ALLOY 400
•
MOUNTING HOLE TYPE: THREADED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY1
OVERALL HEIGHT1.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281 CL A, FORM 1 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.130 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
OVERALL LENGTH3.190 INCHES NOMINAL IN
OVERALL WIDTH2.120 INCHES NOMINAL IN
MATERIALNICKEL ALLOY 400
MOUNTING HOLE TYPETHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
6464642 FIND 10Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
DF2085-208 FIND 10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6404642 FIND 10Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 595-6404642-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 595-6404642-10?
595-6404642-10 is a BRACKET,MOUNTING.
What parts can replace 595-6404642-10?
There are 3 known substitutes for 595-6404642-10: 6464642 FIND 10, DF2085-208 FIND 10, 6404642 FIND 10. Substitute compatibility should be verified for your specific system.
What is the NSN for 595-6404642-10?
595-6404642-10 is cataloged in the U.S. Government catalog under NSN 5340-01-419-5170. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 595-6404642-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.