PartsTable
Technical Data Sheet

594857 — Technical Data Sheet

✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -67.0 FAHRENHEIT AND 347.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.566 INCHES NOMINAL IN, center_hole_diameter: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-927-1198, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
594857
NSN: 5331-00-927-1198
FSC: 5331 — O-RING
CAGE: 26984 — RICHMOND LOX EQUIPMENT CO SUB OF RICHMOND TANK CAR CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-67.0 FAHRENHEIT AND 347.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.566 INCHES NOMINAL IN
center_hole_diameter0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-927-1198
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 594857 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
TEMP RATING: -67.0 FAHRENHEIT AND 347.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER: 0.566 INCHES NOMINAL IN
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
TEMP RATING-67.0 FAHRENHEIT AND 347.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER0.566 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
MS9967-112Interchangeable
interchangeable cross-reference
interchangeable
MILR3533-112ESInterchangeable
interchangeable cross-reference
interchangeable
5331PL1802768Interchangeable
interchangeable cross-reference
interchangeable
AS9967-009Interchangeable
interchangeable cross-reference
interchangeable
MS9967-009Interchangeable
interchangeable cross-reference
interchangeable
AS9967Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 594857?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 594857?
594857 is a O-RING.
What parts can replace 594857?
There are 10 known substitutes for 594857: MS9967-112, MILR3533-112ES, 5331PL1802768 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 594857?
594857 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-927-1198. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 594857