PartsTable
Technical Data Sheet
Download PDF

5946794 — STANDOFF,PLAIN,SNAP-IN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5946794: STANDOFF,PLAIN,SNAP-IN.

The STANDOFF,PLAIN,SNAP-IN is a the manufacturer industrial component. Key specifications include length: 0.600 INCHES NOMINAL IN, corner_radius: 0.060 INCHES NOMINAL IN, flange_diameter: 0.670 INCHES NOMINAL IN, flange_thickness: 0.145 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, style_designator: FLANGED, end_item_identification: DATA RECORDER. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-311-3282, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5946794
NSN: 5340-01-311-3282
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
length0.600 INCHES NOMINAL IN
corner_radius0.060 INCHES NOMINAL IN
flange_diameter0.670 INCHES NOMINAL IN
flange_thickness0.145 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
style_designatorFLANGED
end_item_identificationDATA RECORDER
NSN5340-01-311-3282
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5946794 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 0.670 INCHES NOMINAL IN
•
CORNER RADIUS: 0.060 INCHES NOMINAL IN
•
LENGTH: 0.600 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.145 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLANGED
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER0.670 INCHES NOMINAL IN
CORNER RADIUS0.060 INCHES NOMINAL IN
LENGTH0.600 INCHES NOMINAL IN
FLANGE THICKNESS0.145 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
STYLE DESIGNATORFLANGED
END ITEM IDENTIFICATIONDATA RECORDER
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5946794?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5946794?
5946794 is a STANDOFF,PLAIN,SNAP-IN.
What is the NSN for 5946794?
5946794 is cataloged in the U.S. Government catalog under NSN 5340-01-311-3282. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5946794

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.