The Relay,electromagnetic, cataloged under National Stock Number 5945-01-332-2618, is classified within Federal Supply Class 5945 (Relays and Solenoids) of the Electrical and Electronic Equipment Components group. Government technical data includes 25 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5945-01-332-2618 |
| Item Name | Relay,electromagnetic |
| FSC / FSG | 5945 / 59 — Relays and Solenoids |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 3 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY |
| Main Contact Maximum Voltage Rating in Volts | 115.0 AC AND 28.0 DC |
| Fragility Factor | MODERATELY RUGGED |
| Mounting Facility Pattern | TRIANGLE SINGLE MOUNTING FACILITY |
| Main Contact Load Current Rating at Maximum Rated Voltage | 25.0 AMPERES AC AND 25.0 AMPERES DC RESISTIVE LOAD |
| Main Contact Load Current Rating at Maximum Rated Voltage | 5.0 AMPERES AC AND 5.0 AMPERES DC LAMP LOAD |
| Main Contact Load Current Rating at Maximum Rated Voltage | 10.0 AMPERES AC AND 10.0 AMPERES DC MOTOR LOAD |
| Main Contact Load Current Rating at Maximum Rated Voltage | 12.0 AMPERES AC AND 12.0 AMPERES DC INDUCTIVE LOAD |
| Duty Type | CONTINUOUS |
| Storage Type | GENERAL PURPOSE WAREHOUSE |
| Unthreaded Mounting Hole Diameter | 0.155 INCHES MINIMUM AND 0.161 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| Center to Center Distance Between Mounting Facilities Parallel to the Altitude of an Isosceles Triangle | 1.396 INCHES MINIMUM AND 1.416 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| Winding DC Resistance Rating | 405.0 OHMS MINIMUM AND 495.0 OHMS MAXIMUM SINGLE WINDING |
| Specification/standard Data | 81349-MIL-R-6106/12 GOVERNMENT SPECIFICATION |
| Time Delay | 0.015 SECONDS MAXIMUM FIXED OPERATE AND RELEASE TIME |
| Coil Quantity | 1 |
| Environmental Protection | DUSTPROOF |
| Cubic Measure | 1.061 CUBIC INCHES |
| Winding Quantity | 1 |
| Operating Voltage Rating and Type at Specified Temp | 28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| Center to Center Distance Between Mounting Facilities Parallel to Width | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| Test Data Document | 81349-MIL-R-6106 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Type and Quantity | 9 WIRE HOOK ALL FUNCTIONS |
| Nonpile-Up Main Contact Arrangement | 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| Purpose for Which Designed | GENERAL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| M6106/12-001 | 2/2 Government specification standardization U.S. Government activity |
| MIL-PRF-6106/12 | 4/1 Identification reference U.S. Government activity |
| MIL-R-6106/12 | 5/9 Secondary reference U.S. Government activity |
NSN 5945-01-332-2618 is a Relay,electromagnetic, classified under FSC 5945, Relays and Solenoids. Status: active.
Key specifications for 5945-01-332-2618: Mounting Facility Type and Quantity: 3 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY; Overall Height: 1.010 INCHES MAXIMUM IN; Main Contact Maximum Voltage Rating in Volts: 115.0 AC AND 28.0 DC; Fragility Factor: MODERATELY RUGGED. 25 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.