PartsTable TECHNICAL DATA SHEET
NSN 5945-00-450-8778Government record, cited

Relay, Electromagnetic5945-00-450-8778

NSN 5945-00-450-8778 · NIIN 004508778
FSC 5945 — Relays and Solenoids · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5945-00-450-8778 · 5945004508778 · NIIN 004508778 · 00-450-8778 · FSC 5945 Relays and Solenoids · MS27242-1 · MIL-R-6106 · MIL-PRF-6106 · 6042H181
Nearby stock numbers  ·
Features
  • Relay,electromagnetic — FSC 5945
  • Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
  • Main Contact Maximum Voltage Rating in Volts: 115.0 AC AND 28.0 DC
  • Fragility Factor: MODERATELY RUGGED
  • Mounting Facility Pattern: RECTANGULAR SINGLE MOUNTING FACILITY
  • Arc Quenching Method: AIR
  • Center to Center Distance Between Mounting Facilities Parallel to Length: 3.250 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
  • Main Contact Load Current Rating at Maximum Rated Voltage: 100.0 AMPERES AC AND 100.0 AMPERES DC RESISTIVE LOAD
Identification
  • NSN: 5945-00-450-8778
  • NIIN: 004508778
  • FSC: 5945 — Relays and Solenoids
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Relay,electromagnetic, cataloged under National Stock Number 5945-00-450-8778, is classified within Federal Supply Class 5945 (Relays and Solenoids) of the Electrical and Electronic Equipment Components group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5945-00-450-8778
Item NameRelay,electromagnetic
FSC / FSG5945 / 59 — Relays and Solenoids
StatusACTIVE
Mounting Facility Type and Quantity4 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
Main Contact Maximum Voltage Rating in Volts115.0 AC AND 28.0 DC
Fragility FactorMODERATELY RUGGED
Mounting Facility PatternRECTANGULAR SINGLE MOUNTING FACILITY
Arc Quenching MethodAIR
Center to Center Distance Between Mounting Facilities Parallel to Length3.250 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
Main Contact Load Current Rating at Maximum Rated Voltage100.0 AMPERES AC AND 100.0 AMPERES DC RESISTIVE LOAD
Main Contact Load Current Rating at Maximum Rated Voltage100.0 AMPERES AC AND 100.0 AMPERES DC INDUCTIVE LOAD
Main Contact Load Current Rating at Maximum Rated Voltage100.0 AMPERES DC MOTOR LOAD
Duty TypeCONTINUOUS
Storage TypeGENERAL PURPOSE WAREHOUSE
Unthreaded Mounting Hole Diameter0.218 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
Winding DC Resistance Rating51.0 OHMS NOMINAL SINGLE WINDING
Specification/standard Data96906-MS27242 GOVERNMENT STANDARD
Time Delay0.01 SECONDS MAXIMUM FIXED RELEASE TIME
Time Delay0.025 SECONDS MAXIMUM FIXED OPERATE TIME
Coil Quantity1
Environmental ProtectionHERMETIC
Cubic Measure36.501 CUBIC INCHES
Winding Quantity1
Operating Voltage Rating and Type at Specified Temp29.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING
Center to Center Distance Between Mounting Facilities Parallel to Width2.687 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
Test Data Document81349-MIL-R-6106 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Terminal Type and Quantity4 THREADED STUD ALL FUNCTIONS
Nonpile-Up Main Contact Arrangement1 POLE, SINGLE THROW, NORMALLY OPEN, DOUBLE MAKE, MOMENTARY ACTION
Purpose for Which DesignedGENERAL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MS27242-1 2/2 Government specification standardization
U.S. Government activity
MIL-R-6106 5/9 Secondary reference
U.S. Government activity
MIL-PRF-6106 4/1 Identification reference
U.S. Government activity
6042H181 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity

Frequently Asked Questions

What is NSN 5945-00-450-8778?

NSN 5945-00-450-8778 is a Relay,electromagnetic, classified under FSC 5945, Relays and Solenoids. Status: active.

What are the specifications of 5945-00-450-8778?

Key specifications for 5945-00-450-8778: Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY; Overall Height: 2.953 INCHES MAXIMUM IN; Main Contact Maximum Voltage Rating in Volts: 115.0 AC AND 28.0 DC; Fragility Factor: MODERATELY RUGGED. 26 specifications are documented in the U.S. Government catalog.

Is NSN 5945-00-450-8778 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com