PartsTable
Technical Data Sheet
Download PDF

5941304 — WASHER,FINISHING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5941304: WASHER,FINISHING.

The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include hole_diameter: 0.463 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN, outside_diameter: 1.125 INCHES NOMINAL IN, surface_treatment: CADMIUM OR ZINC OVERALL, material_thickness: 0.062 INCHES NOMINAL IN, end_item_identification: MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV), material_document_and_classification: ASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-796-2269, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5941304
NSN: 5310-00-796-2269
FSC: 5310 — Nuts and Washers
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
hole_diameter0.463 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN
outside_diameter1.125 INCHES NOMINAL IN
surface_treatmentCADMIUM OR ZINC OVERALL
material_thickness0.062 INCHES NOMINAL IN
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV)
material_document_and_classificationASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416 TY 2 CL 1 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY 2 CL 1 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5310-00-796-2269
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5941304 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 1 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY 2 CL 1 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 1.125 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
•
HOLE DIAMETER: 0.463 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 1 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY 2 CL 1 FED SPEC 2ND TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER1.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV)
MATERIALSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
HOLE DIAMETER0.463 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
10388964Reference document
Same NSN cross-reference
Reference document — Informative reference only
5310007962269Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5941304?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5941304?
5941304 is a WASHER,FINISHING.
What parts can replace 5941304?
There are 2 known substitutes for 5941304: 10388964, 5310007962269. Substitute compatibility should be verified for your specific system.
What is the NSN for 5941304?
5941304 is cataloged in the U.S. Government catalog under NSN 5310-00-796-2269. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5941304

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.