PartsTable
Technical Data Sheet
5939 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- For dry cleaning of optical surfaces with coarse and fine dirt particles<br>- Set consisting of:<br><br>Lens pen:<br>- Allows highly effective and gentle cleaning of all optical surfaces, specially designed for lenses and filters<br>- Immediately ready for use as the screw closure ensures automatic activation of the velvety surface, no need to activate the fibers separately<br>- Particularly long service life as dry cleaning means that no liquid can dry out or run out<br>- Original lens pen<br>- Removes dust, grease spots and other smudges<br>- Does not dry out<br>- With a lens brush for dry precleaning<br>- Special coating for high-quality lenses<br>- Conveniently shaped pen with a clip for attachment and an ergonomic design<br>- Curved velvety surface<br>- Diameter: 13 mm, especially for lenses and filters<br><br>Air blower:<br>- For gently cleaning cameras, sensors, mirrors, lenses and eyepieces<br>- Removes dust, crumbs and other small particles without touching the surface<br>- This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-108-9661, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
5939
NSN: 5330-00-108-9661
FSC: 5330
CAGE: 80850 — INTERLINE BRANDS, INC. DBA J. A. SEXAUER (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING METER CASE
body_styleSTRAIGHT SHAPE W/CLAMP
body_width1.000 INCHES NOMINAL IN
scale_typeCONCENTRIC DIAL
shell_typeSOLID
body_height1.375 INCHES NOMINAL IN
body_length1.000 INCHES NOMINAL IN
design_typeFLUCTUATING
stem_length4.625 INCHES NOMINAL IN
dial_diameter2.000 INCHES NOMINAL IN
terminal_typeSCREW SINGLE MATING END ALL CONTACT GROUPINGS
inclosure_typeFULLY INCLOSED
NSN5330-00-108-9661
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5939 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CENTER HOLE DIAMETER: 1.063 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT: 0.563 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
MATERIAL: RUBBER SYNTHETIC OVERALL
PERIPHERAL DIAMETER: 2.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.063 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.563 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
MATERIALRUBBER SYNTHETIC OVERALL
PERIPHERAL DIAMETER2.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
5939Interchangeable
interchangeable cross-reference
interchangeable
GG-T-353 TYPE 1Interchangeable
interchangeable cross-reference
interchangeable
GG-T-353Interchangeable
interchangeable cross-reference
interchangeable
1801161Interchangeable
interchangeable cross-reference
interchangeable
2339644Interchangeable
interchangeable cross-reference
interchangeable
02000007573Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5939?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5939?
5939 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Hama.
What parts can replace 5939?
There are 12 known substitutes for 5939: 5939, GG-T-353 TYPE 1, GG-T-353 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5939?
5939 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-108-9661. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5939