PartsTable
Technical Data Sheet
PartsTable / MRO / 5937
5937 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.062 INCHES NOMINAL IN, shaft_style: ROUND, bearing_type: BEARING SHAFT, pilot_length: 0.0930 INCHES NOMINAL IN, shaft_length: 1.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-330-3614, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5937
NSN: 5330-00-330-3614
FSC: 5330
CAGE: 80850 — INTERLINE BRANDS, INC. DBA J. A. SEXAUER (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.062 INCHES NOMINAL IN
shaft_styleROUND
bearing_typeBEARING SHAFT
pilot_length0.0930 INCHES NOMINAL IN
shaft_length1.000 INCHES NOMINAL IN
shaft_runout0.002 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter2.000 INCHES NOMINAL IN
lateral_runout0.002 INCHES IN
pilot_diameter1.8740 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL IN
NSN5330-00-330-3614
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5937 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
F400A336Interchangeable
interchangeable cross-reference
interchangeable
25070Interchangeable
interchangeable cross-reference
interchangeable
09-5937Interchangeable
interchangeable cross-reference
interchangeable
113570Interchangeable
interchangeable cross-reference
interchangeable
P37-433-3 PIECEInterchangeable
interchangeable cross-reference
interchangeable
5937Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5937?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5937?
5937 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5937?
There are 19 known substitutes for 5937: F400A336, 25070, 09-5937 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5937?
5937 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-330-3614. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5937

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026