PartsTable
Technical Data Sheet
Download PDF

593692 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

593692: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130, first_leg_angle: 83.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, first_leg_length: 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN, second_leg_angle: 120.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-201-1052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
593692
NSN: 5340-00-201-1052
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 4130
first_leg_angle83.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
first_leg_length0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
second_leg_angle120.0 DEGREES NOMINAL
second_leg_styleEND RADIUS
second_leg_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
style_designatorDOUBLE ANGLE
second_leg_length0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
surface_treatmentCADMIUM
fabrication_methodFORMED
NSN5340-00-201-1052
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 593692 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 83.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.056 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG ANGLE: 120.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
FIRST LEG ANGLE83.0 DEGREES NOMINAL
CENTER SECTION THICKNESS0.056 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
SECOND LEG ANGLE120.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 593692?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 593692?
593692 is a BRACKET,DOUBLE ANGLE.
What is the NSN for 593692?
593692 is cataloged in the U.S. Government catalog under NSN 5340-00-201-1052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 593692

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.