The Connector,receptacle,electrical, cataloged under National Stock Number 5935-01-533-8212, is classified within Federal Supply Class 5935 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Sae International Dba Sae International. Government technical data includes 22 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 11 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-533-8212 |
| Primary Part Number | MS3100F18-4P |
| Item Name | Connector,receptacle,electrical |
| FSC / FSG | 5935 / 59 — No Item Name Available |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Mating End Quantity | 1 |
| Contact Position Arrangement Style | 18-4 SINGLE MATING END |
| Test Data Document | 81349-MIL-DTL-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Nominal Thread Size | 1.125 INCHES IN |
| Specification/standard Data | 96906MS3100 GOVERNMENT STANDARD |
| Included Contact Type | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| Polarization Method | KEY OR MULTIPLE KEY |
| Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| Included Contact Quantity | 4 SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Quantity Per Inch | 18 |
| Connector Cable Strain Relief Method | CABLE CLAMP |
| Terminal Type | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Series Designator | UNEF |
| Connector Locking Method | EXTERNALLY THREADED SHELL |
| Center to Center Distance Between Mounting Facilities Parallel to Height | 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM IN |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Thread Class | 2A A |
| Distance From Mounting Shoulder to Front Face | 0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN |
| Unthreaded Mounting Hole Diameter | 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| Body Style | STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF |
| Threaded Device Type | COUPLING FACILITY |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| SAE-AS50151 | Sae International Dba Sae International (USA) |
| MS3100 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| MS3100F18-4P | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-DTL-5015 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MS3100F18-4P PRIMARY | Sae International Dba Sae International (USA) |
NSN 5935-01-533-8212 is a Connector,receptacle,electrical, manufactured by Sae International Dba Sae International, classified under FSC 5935 (No Item Name Available). Status: active.
NSN 5935-01-533-8212 has 5 cross-referenced part numbers: SAE-AS50151 (Sae International Dba Sae International), MS3100 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M), MS3100F18-4P (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M), MIL-DTL-5015 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MS3100F18-4P (Sae International Dba Sae International).
There are 11 known substitutes for 5935-01-533-8212: 4820-01-323-6180, 4820-01-323-7321, 4330-01-323-7362 and 8 more. Verify interchangeability with system specifications before substitution.
Key specifications for MS3100F18-4P: Mating End Quantity: 1; Overall Height: 1.344 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN; Contact Position Arrangement Style: 18-4 SINGLE MATING END; Test Data Document: 81349-MIL-DTL-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).. 25 total characteristics are documented in the Federal Logistics Information System.