The Connector,plug,electrical, cataloged under National Stock Number 5935-01-508-4378, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-508-4378 |
| Primary Part Number | MS3409DJ13E3SWX |
| Item Name | Connector,plug,electrical |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Connector Locking Method | INTERNALLY THREADED COUPLING RING |
| Shell Type | SOLID |
| Distance From Centerline to Cable End | 3.188 INCHES MAXIMUM IN |
| Body Angle in Deg | 135.0 |
| Body Style | ANGLE SHAPE W/CABLE CLAMP |
| Terminal Type | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| Overall Diameter | 1.156 INCHES MAXIMUM IN |
| Mating End Quantity | 1 |
| Precious Material | GOLD |
| Contact Position Arrangement Style | 14S-7 SINGLE MATING END |
| Shell Surface Treatment | CADMIUM |
| Insert Position in Deg | 180.0 |
| Distance From Centerline to Connector End | 5.188 INCHES MAXIMUM IN |
| Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| Included Contact Quantity | 3 SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.875 INCHES IN |
| Specification/standard Data | 96906-MS3408 GOVERNMENT STANDARD |
| Included Contact Type | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| Polarization Method | KEYWAY OR MULTIPLE KEYWAY |
| Connector Cable Strain Relief Method | CABLE CLAMP |
| Environmental Protection | CORROSION RESISTANT AND SALT SPRAY PROOF AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WEATHER RESISTANT |
| Precious Material and Location | CONTACT SURFACES GOLD |
| Contact Removability | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Class | 2A AND 2B A |
| Test Data Document | 81349-MIL-DTL-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Cable Entrance Diameter | 0.250 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN |
| Thread Quantity Per Inch | 20 |
| Threaded Device Type | BACK SHELL AND COUPLING FACILITY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS3409DJ13E3SWX PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| MS3409DJ13E3SWX | 5/9 Secondary reference U.S. Government activity |
| MIL-DTL-5015 | 5/9 Secondary reference U.S. Government activity |
| MS3409DJ15A-7PX | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| SAE-AS50151 | 3/1 Design control — primary reference Sae International Dba Sae International |
NSN 5935-01-508-4378 is a Connector,plug,electrical, manufactured by Sae International Dba Sae International, classified under FSC 5935, Connectors, Electrical. Status: active.
NSN 5935-01-508-4378 has 1 manufacturer part number on file: MS3409DJ13E3SWX (Sae International Dba Sae International).
Key specifications for MS3409DJ13E3SWX: Connector Locking Method: INTERNALLY THREADED COUPLING RING; Shell Type: SOLID; Distance From Centerline to Cable End: 3.188 INCHES MAXIMUM IN; Body Angle in Deg: 135.0. 29 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.