The Clamp,cable,electrical Connector, cataloged under National Stock Number 5935-01-478-9602, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Glenair, Inc.. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-478-9602 |
| Primary Part Number | 450DA001NF18 |
| Item Name | Clamp,cable,electrical Connector |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Manufacturer | Glenair, Inc. |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 1 BODY |
| Distance From Centerline to Cable End | 1.460 INCHES MAXIMUM IN |
| Body Angle in Deg | 90.0 |
| Distance From Centerline to Connector End | 1.260 INCHES MAXIMUM IN |
| Style Designator | CLAMP, ANGLE TIE STRAP TYPE |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 1.062 INCHES IN |
| Cable Opening Quantity | 1 |
| Size Designation | 18 |
| Surface Treatment | CADMIUM AND CHROMATE AND NICKEL |
| Thread Class | 2B |
| Thread Quantity Per Inch | 18 |
| Material | ALUMINUM LOCATION NOT OTHERWISE SPECIFIED |
| Thread Series Designator | UNEF |
| Cable Opening Diameter | 0.872 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 450DA001NF18 PRIMARY | Glenair, Inc. (USA) |
NSN 5935-01-478-9602 is a Clamp,cable,electrical Connector, manufactured by Glenair, Inc., classified under FSC 5935, Connectors, Electrical. Status: active.
NSN 5935-01-478-9602 has 1 manufacturer part number on file: 450DA001NF18 (Glenair, Inc.).
Key specifications for 450DA001NF18: Mounting Facility Type and Quantity: 1 BODY; Distance From Centerline to Cable End: 1.460 INCHES MAXIMUM IN; Body Angle in Deg: 90.0; Distance From Centerline to Connector End: 1.260 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.