The Connector,receptacle,electrical, cataloged under National Stock Number 5935-01-470-9614, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. Government technical data includes 4 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-470-9614 |
| Item Name | Connector,receptacle,electrical |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Status | ACTIVE |
| Center to Center Distance Between Mounting Facilities Parallel to Length | 1.307 INCHES MINIMUM AND 1.317 INCHES MAXIMUM IN |
| Unthreaded Mounting Hole Diameter | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Specification/standard Data | 81349-MIL-C-24308/2 GOVERNMENT SPECIFICATION |
| Test Data Document | 81349-MIL-C-24308 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MIL-DTL-24308/2 | 4/1 Identification reference U.S. Government activity |
| M24308/2-18 | 2/2 Government specification standardization U.S. Government activity |
| MIL-C-24308/2 | 5/9 Secondary reference U.S. Government activity |
NSN 5935-01-470-9614 is a Connector,receptacle,electrical, classified under FSC 5935, Connectors, Electrical. Status: active.
Key specifications for 5935-01-470-9614: Center to Center Distance Between Mounting Facilities Parallel to Length: 1.307 INCHES MINIMUM AND 1.317 INCHES MAXIMUM IN; Unthreaded Mounting Hole Diameter: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Overall Length: 1.526 INCHES MINIMUM AND 1.556 INCHES MAXIMUM IN; Overall Width: 0.479 INCHES MINIMUM AND 0.509 INCHES MAXIMUM IN. 4 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.