The Connector,plug,electrical, cataloged under National Stock Number 5935-01-372-6776, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-372-6776 |
| Primary Part Number | MS3406DJ11D3P |
| Item Name | Connector,plug,electrical |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Connector Locking Method | INTERNALLY THREADED COUPLING NUT |
| Shell Type | SOLID |
| Body Style | STRAIGHT SHAPE, INTERNAL COUPLING W/STRAIN RELIEF |
| Terminal Type | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| Contact Material | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| Overall Diameter | 0.969 INCHES NOMINAL IN |
| Mating End Quantity | 1 |
| Precious Material | GOLD |
| Contact Position Arrangement Style | 10SL-3 SINGLE MATING END |
| Shell Surface Treatment | CADMIUM |
| Insert Position in Deg | 0.0 |
| Precious Material and Weight | 0.003 GOLD GRAINS, TROY |
| Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| Included Contact Quantity | 3 SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.625 INCHES IN |
| Specification/standard Data | 96906-MS3406DJ11D3P GOVERNMENT SPECIFICATION |
| Body Length | 4.938 INCHES NOMINAL IN |
| Operating Temp Rating | -55.0 CELSIUS MINIMUM AND 175.0 CELSIUS MAXIMUM DEGC |
| Included Contact Type | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| Polarization Method | KEY, MULTIPLE KEY GROOVE |
| Contact Surface Treatment Document and Classification | MIL-G-45204 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| Connector Cable Strain Relief Method | CABLE CLAMP |
| Environmental Protection | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND SHOCK RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND EXPLOSION PROOF AND SHOCK PROOF |
| Precious Material and Location | CONTACT SURFACES GOLD |
| Contact Removability | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Class | 2B |
| Test Data Document | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Cable Entrance Diameter | 0.250 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Contact Surface Treatment | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS3406DJ11D3P PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| MIL-C-5015 | 5/9 Secondary reference U.S. Government activity |
| SAE-AS50151 | 3/1 Design control — primary reference Sae International Dba Sae International |
| MS3406DJ11D3P | 5/9 Secondary reference U.S. Government activity |
NSN 5935-01-372-6776 is a Connector,plug,electrical, manufactured by Sae International Dba Sae International, classified under FSC 5935, Connectors, Electrical. Status: active.
NSN 5935-01-372-6776 has 1 manufacturer part number on file: MS3406DJ11D3P (Sae International Dba Sae International).
Key specifications for MS3406DJ11D3P: Connector Locking Method: INTERNALLY THREADED COUPLING NUT; Shell Type: SOLID; Body Style: STRAIGHT SHAPE, INTERNAL COUPLING W/STRAIN RELIEF; Terminal Type: CRIMP SINGLE MATING END SINGLE CONTACT GROUPING. 30 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.