The Connector,plug,electrical, cataloged under National Stock Number 5935-01-352-9846, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-352-9846 |
| Primary Part Number | MS3406DJ40E56P |
| Item Name | Connector,plug,electrical |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Connector Locking Method | INTERNALLY THREADED COUPLING RING |
| Shell Type | SOLID |
| Body Style | STRAIGHT SHAPE, INTERNAL COUPLING W/STRAIN RELIEF |
| Terminal Type | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| Contact Material | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| Overall Diameter | 2.719 INCHES MAXIMUM IN |
| Mating End Quantity | 1 |
| Precious Material | GOLD |
| Contact Position Arrangement Style | 40-56 SINGLE MATING END |
| Shell Surface Treatment | CADMIUM AND CHROMATE AND NICKEL |
| Insert Position in Deg | 0.0 |
| Precious Material and Weight | 0.085 GOLD GRAINS, TROY |
| Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| Included Contact Quantity | 85 SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 2.500 INCHES IN |
| Specification/standard Data | 96906-MS3406 GOVERNMENT STANDARD |
| Body Length | 7.750 INCHES MAXIMUM IN |
| Operating Temp Rating | -55.0 CELSIUS MINIMUM AND 175.0 CELSIUS MAXIMUM DEGC |
| Included Contact Type | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| Polarization Method | KEYWAY OR MULTIPLE KEYWAY |
| Contact Surface Treatment Document and Classification | MIL-G-45204,TY 2,GRADE C,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| Connector Cable Strain Relief Method | CABLE CLAMP |
| Environmental Protection | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND SHOCK RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND EXPLOSION PROOF |
| Precious Material and Location | CONTACT SURFACES GOLD |
| Contact Removability | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Class | 2B |
| Test Data Document | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Cable Entrance Diameter | 1.437 INCHES MINIMUM AND 1.840 INCHES MAXIMUM IN |
| Thread Quantity Per Inch | 16 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS3406DJ40E56P PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| SAE-AS50151 | 3/1 Design control — primary reference Sae International Dba Sae International |
| MIL-C-5015 | 5/9 Secondary reference U.S. Government activity |
| MS3406DJ40E56P | 5/9 Secondary reference U.S. Government activity |
NSN 5935-01-352-9846 is a Connector,plug,electrical, manufactured by Sae International Dba Sae International, classified under FSC 5935, Connectors, Electrical. Status: active.
NSN 5935-01-352-9846 has 1 manufacturer part number on file: MS3406DJ40E56P (Sae International Dba Sae International).
Key specifications for MS3406DJ40E56P: Connector Locking Method: INTERNALLY THREADED COUPLING RING; Shell Type: SOLID; Body Style: STRAIGHT SHAPE, INTERNAL COUPLING W/STRAIN RELIEF; Terminal Type: CRIMP SINGLE MATING END SINGLE CONTACT GROUPING. 30 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.