The Cover,electrical Connector, cataloged under National Stock Number 5935-01-286-2856, is classified within Federal Supply Class 5935 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 19 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-286-2856 |
| Primary Part Number | MIL-DTL-38999/33 |
| Item Name | Cover,electrical Connector |
| FSC / FSG | 5935 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Attachment Feature Length | 120.0 MILLIMETERS MINIMUM AND 140.0 MILLIMETERS MAXIMUM MM |
| Nominal Thread Size | 1.500 INCHES IN |
| Size Designation | 23 |
| Surface Treatment | ANODIZE |
| Mounting Facility Type and Quantity | 1 THREADED COUPLING |
| Seal Type | GASKET |
| Test Data Document | 81349-DOD-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Specification/standard Data | 81349-DOD-C-38999/33 GOVERNMENT SPECIFICATION |
| Eye Inside Diameter | 4.11 MILLIMETERS MINIMUM AND 4.49 MILLIMETERS MAXIMUM MM |
| Material | RUBBER SILICONE SEAL |
| Nominal Thread Length | 7.72 MILLIMETERS MM |
| Furnished Items | WIRE ROPE |
| Thread Class | 2B |
| Overall Diameter | 45.0 MILLIMETERS MAXIMUM MM |
| Thread Series Designator | SPECIAL ACME |
| Thread Quantity Per Inch | 10 |
| Body Height | 16.0 MILLIMETERS NOMINAL MM |
| Thread Direction | RIGHT-HAND |
| Style Designator | INTERNAL THREAD W/CHAIN OR ROPE |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-DTL-38999/33 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| D38999/33W23N | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| DOD-C-38999/33 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5935-01-286-2856 is a Cover,electrical Connector, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5935 (No Item Name Available). Status: active.
NSN 5935-01-286-2856 has 3 cross-referenced part numbers: MIL-DTL-38999/33 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), D38999/33W23N (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), DOD-C-38999/33 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 12 known substitutes for 5935-01-286-2856: 5935-01-210-2730, 5935-01-279-8630, 5935-01-280-5470 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-DTL-38999/33: Attachment Feature Length: 120.0 MILLIMETERS MINIMUM AND 140.0 MILLIMETERS MAXIMUM MM; Nominal Thread Size: 1.500 INCHES IN; Size Designation: 23; Surface Treatment: ANODIZE. 19 total characteristics are documented in the Federal Logistics Information System.