The Connector,plug,electrical, cataloged under National Stock Number 5935-01-268-6467, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-268-6467 |
| Primary Part Number | MS3408D-18-11B |
| Item Name | Connector,plug,electrical |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Connector Locking Method | INTERNALLY THREADED COUPLING RING |
| Shell Type | SOLID |
| Distance From Centerline to Cable End | 0.932 INCHES MINIMUM AND 1.056 INCHES MAXIMUM IN |
| Body Angle in Deg | 90.0 |
| Body Style | ANGLE SHAPE W/CABLE CLAMP |
| Nominal Thread Length | 0.664 INCHES IN |
| Overall Diameter | 1.250 INCHES MAXIMUM IN |
| Mating End Quantity | 1 |
| Contact Position Arrangement Style | 18-11 SINGLE MATING END |
| Shell Surface Treatment | CADMIUM AND CHROMATE AND NICKEL |
| Insert Position in Deg | 0.0 |
| Distance From Centerline to Connector End | 2.765 INCHES MAXIMUM IN |
| Shell Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 1.000 INCHES IN |
| Specification/standard Data | 96906-MS3408 GOVERNMENT STANDARD |
| Operating Temp Rating | -55.0 CELSIUS MINIMUM AND 175.0 CELSIUS MAXIMUM DEGC |
| Polarization Method | KEY, MULTIPLE KEY GROOVE |
| Connector Cable Strain Relief Method | CABLE CLAMP |
| Environmental Protection | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND SHOCK RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND EXPLOSION PROOF |
| Thread Class | 2B |
| Test Data Document | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Cable Entrance Diameter | 0.501 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN |
| Thread Quantity Per Inch | 20 |
| Threaded Device Type | COUPLING FACILITY |
| Thread Series Designator | UNEF |
| Insert Material | RUBBER SILICONE CLASS Q SINGLE MATING END |
| Shell Material | ALUMINUM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS3408D-18-11B PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| MIL-C-5015 | 5/9 Secondary reference U.S. Government activity |
| SAE-AS50151 | 3/1 Design control — primary reference Sae International Dba Sae International |
| MS3408D18-11B | 5/9 Secondary reference U.S. Government activity |
NSN 5935-01-268-6467 is a Connector,plug,electrical, manufactured by Sae International Dba Sae International, classified under FSC 5935, Connectors, Electrical. Status: active.
NSN 5935-01-268-6467 has 1 manufacturer part number on file: MS3408D-18-11B (Sae International Dba Sae International).
Key specifications for MS3408D-18-11B: Connector Locking Method: INTERNALLY THREADED COUPLING RING; Shell Type: SOLID; Distance From Centerline to Cable End: 0.932 INCHES MINIMUM AND 1.056 INCHES MAXIMUM IN; Body Angle in Deg: 90.0. 28 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.