The Connector,receptacle,electrical, cataloged under National Stock Number 5935-01-206-2835, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-206-2835 |
| Primary Part Number | MS3100F40-56PX |
| Item Name | Connector,receptacle,electrical |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Connector Locking Method | EXTERNALLY THREADED SHELL |
| Body Style | STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF |
| Terminal Type | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| Mating End Quantity | 1 |
| Contact Position Arrangement Style | 40-56 SINGLE MATING END |
| Shell Surface Treatment | CADMIUM |
| Insert Position in Deg | 144.0 |
| Unthreaded Mounting Hole Diameter | 0.168 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN |
| Center to Center Distance Between Mounting Facilities Parallel to Height | 2.188 INCHES NOMINAL IN |
| Included Contact Quantity | 85 SINGLE MATING END SINGLE CONTACT GROUPING |
| Shell Surface Treatment Document and Classification | QQ-P-416 TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 2.500 INCHES IN |
| Specification/standard Data | 96906-MS3100 GOVERNMENT STANDARD |
| Included Contact Type | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 2.188 INCHES NOMINAL IN |
| Polarization Method | KEY, MULTIPLE KEY GROOVE |
| Connector Cable Strain Relief Method | CABLE CLAMP |
| Distance From Mounting Shoulder to Front Face | 0.875 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN |
| Contact Removability | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Class | 2A A |
| Test Data Document | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Cable Entrance Diameter | 1.562 INCHES MINIMUM IN |
| Thread Quantity Per Inch | 16 |
| Threaded Device Type | COUPLING FACILITY |
| Thread Series Designator | UN |
| Insert Material | RUBBER SINGLE MATING END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS3100F40-56PX PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| MS3100F40-56PX | 5/9 Secondary reference U.S. Government activity |
| MIL-C-5015 | 5/9 Secondary reference U.S. Government activity |
| SAE-AS50151 | 3/1 Design control — primary reference Sae International Dba Sae International |
NSN 5935-01-206-2835 is a Connector,receptacle,electrical, manufactured by Sae International Dba Sae International, classified under FSC 5935, Connectors, Electrical. Status: active.
NSN 5935-01-206-2835 has 1 manufacturer part number on file: MS3100F40-56PX (Sae International Dba Sae International).
Key specifications for MS3100F40-56PX: Overall Height: 2.750 INCHES NOMINAL IN; Connector Locking Method: EXTERNALLY THREADED SHELL; Body Style: STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF; Terminal Type: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING. 27 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.