The Connector,receptacle,electrical, cataloged under National Stock Number 5935-01-121-2284, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-121-2284 |
| Item Name | Connector,receptacle,electrical |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Status | ACTIVE |
| Connector Locking Method | EXTERNALLY THREADED SHELL |
| Shell Type | SOLID |
| Body Style | STRAIGHT SHAPE W/CABLE CLAMP |
| Terminal Type | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| Mating End Quantity | 1 |
| Precious Material | GOLD |
| Contact Position Arrangement Style | N SINGLE MATING END |
| Unthreaded Mounting Hole Diameter | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| Precious Material and Weight | 0.005 GOLD GRAINS, TROY |
| Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| Center to Center Distance Between Mounting Facilities Parallel to Height | 0.713 INCHES MINIMUM AND 0.723 INCHES MAXIMUM IN |
| Included Contact Quantity | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.625 INCHES IN |
| Specification/standard Data | 81349-MIL-C-39012/02 GOVERNMENT SPECIFICATION |
| Bushing Diameter | 0.750 INCHES NOMINAL IN |
| Included Contact Type | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| Contact Maximum AC Voltage Rating in Volts | 1000.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 0.713 INCHES MINIMUM AND 0.723 INCHES MAXIMUM IN |
| Contact Surface Treatment Document and Classification | MIL-G-45204,TYPE 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| Connector Cable Strain Relief Method | COMPRESSION NUT |
| Environmental Protection | CORROSION RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT AND MOISTURE RESISTANT |
| Precious Material and Location | CONTACT SURFACE GOLD |
| Distance From Mounting Shoulder to Front Face | 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM IN |
| Contact Removability | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Class | 2A A |
| Test Data Document | 81349-MIL-C-39012 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| M39012/02-0513 | 2/2 Government specification standardization U.S. Government activity |
| MIL-C-39012/02 | 5/9 Secondary reference U.S. Government activity |
| MIL-PRF-39012/2 | 4/1 Identification reference U.S. Government activity |
| KN-19-148 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
NSN 5935-01-121-2284 is a Connector,receptacle,electrical, classified under FSC 5935, Connectors, Electrical. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5935-01-315-8901. Verify interchangeability with system specifications before substitution.
Key specifications for 5935-01-121-2284: Overall Height: 0.985 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN; Connector Locking Method: EXTERNALLY THREADED SHELL; Shell Type: SOLID; Body Style: STRAIGHT SHAPE W/CABLE CLAMP. 27 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.