The Retainer,electrical Connector, cataloged under National Stock Number 5935-01-108-8162, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. Government technical data includes 8 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-108-8162 |
| Item Name | Retainer,electrical Connector |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 1 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY |
| Distance From Retainer Center to Mounting Facility Center at Loop Tightening Device | 0.950 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN |
| Unthreaded Mounting Hole Diameter | 0.248 INCHES MINIMUM AND 0.260 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| Style Designator | DOUBLE FOOT, SCREW CLAMP |
| Material Document and Classification | QQ-B-637 FED SPEC SINGLE MATERIAL RESPONSE |
| Accommodated Item Securing Device Type | CLAMP |
| Inside Diameter | 1.375 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN |
| Material | COPPER ALLOY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| F21987 | 5/9 Secondary reference Raytheon Co Machlett Laboratories Inc Mw and Pt Div |
| 138C019H03 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5935-01-108-8162 is a Retainer,electrical Connector, classified under FSC 5935, Connectors, Electrical. Status: active.
Key specifications for 5935-01-108-8162: Mounting Facility Type and Quantity: 1 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY; Overall Height: 0.350 INCHES MAXIMUM IN; Distance From Retainer Center to Mounting Facility Center at Loop Tightening Device: 0.950 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN; Unthreaded Mounting Hole Diameter: 0.248 INCHES MINIMUM AND 0.260 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN. 8 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.