The Connector Body,receptacle,electr, cataloged under National Stock Number 5935-01-108-7630, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-108-7630 |
| Primary Part Number | M81511/41FJ02A1 |
| Item Name | Connector Body,receptacle,electr |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Connector Locking Method | BAYONET PINBAYONET PIN |
| Shell Type | SOLIDSOLID |
| Body Style | STRAIGHT SHAPE, EXTERNAL COUPLINGSTRAIGHT SHAPE, EXTERNAL COUPLING |
| Mating End Quantity | 11 |
| Contact Position Arrangement Style | 24-74 SINGLE MATING END24-74 SINGLE MATING END |
| Shell Surface Treatment | CHROMIUMCHROMIUM |
| Insert Position in Deg | 67.0 AND 67.0 AND 164.0 AND 164.0 AND 218.0 AND 218.0 AND 280.0280.0 |
| Unthreaded Mounting Hole Diameter | 0.143 INCHES MINIMUM AND 0.143 INCHES MINIMUM AND 0.153 INCHES MAXIMUM0.153 INCHES MAXIMUM IN |
| Shell Material Document and Classification | QQ-A-367,T6 FED SPEC SINGLE MATERIAL RESPONSEQQ-A-367,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| Center to Center Distance Between Mounting Facilities Parallel to Height | 1.370 INCHES MINIMUM AND 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM1.380 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HANDRIGHT-HAND |
| Nominal Thread Size | 1.500 INCHES1.500 INCHES IN |
| Specification/standard Data | 81349-MIL-C-81511/41 GOVERNMENT SPECIFICATION81349-MIL-C-81511/41 GOVERNMENT SPECIFICATION |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 1.370 INCHES MINIMUM AND 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM1.380 INCHES MAXIMUM IN |
| Polarization Method | KEYWAY OR MULTIPLE KEYWAYKEYWAY OR MULTIPLE KEYWAY |
| Environmental Protection | MOISTURE PROOF AND MOISTURE PROOF AND SALT WATER RESISTANT AND SALT WATER RESISTANT AND SHOCK PROOF AND SHOCK PROOF AND VIBRATION PROOFVIBRATION PROOF |
| Distance From Mounting Shoulder to Front Face | 0.894 INCHES MINIMUM AND 0.894 INCHES MINIMUM AND 0.906 INCHES MAXIMUM0.906 INCHES MAXIMUM IN |
| Thread Class | 2A2A |
| Test Data Document | 81349-MIL-C-81511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).81349-MIL-C-81511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 2828 |
| Threaded Device Type | BACK SHELLBACK SHELL |
| Thread Series Designator | UNUN |
| Shell Material | ALUMINUM ALLOY 6061ALUMINUM ALLOY 6061 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| M81511/41FJ02A1 PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| SAE-AS81511/41 | 3/1 Design control — primary reference Sae International Dba Sae International |
| MIL-C-81511/41 | 5/9 Secondary reference U.S. Government activity |
| M81511/41FJ02A1 | 5/9 Secondary reference U.S. Government activity |
NSN 5935-01-108-7630 is a Connector Body,receptacle,electr, manufactured by Sae International Dba Sae International, classified under FSC 5935, Connectors, Electrical. Status: active.
NSN 5935-01-108-7630 has 1 manufacturer part number on file: M81511/41FJ02A1 (Sae International Dba Sae International).
Key specifications for M81511/41FJ02A1: Overall Height: 1.695 INCHES MINIMUM AND 1.695 INCHES MINIMUM AND 1.711 INCHES MAXIMUM1.711 INCHES MAXIMUM IN; Connector Locking Method: BAYONET PINBAYONET PIN; Shell Type: SOLIDSOLID; Body Style: STRAIGHT SHAPE, EXTERNAL COUPLINGSTRAIGHT SHAPE, EXTERNAL COUPLING. 23 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.