The Connector Body,receptacle,electr, cataloged under National Stock Number 5935-01-106-0746, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-106-0746 |
| Item Name | Connector Body,receptacle,electr |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Status | ACTIVE |
| Connector Locking Method | BAYONET PINBAYONET PIN |
| Shell Type | SOLIDSOLID |
| Body Style | STRAIGHT SHAPE, EXTERNAL COUPLINGSTRAIGHT SHAPE, EXTERNAL COUPLING |
| Nominal Thread Length | 0.290 INCHES0.290 INCHES IN |
| Bushing Accommodation Hole Shape | ROUND W/FLATROUND W/FLAT |
| Overall Diameter | 1.797 INCHES MINIMUM AND 1.797 INCHES MINIMUM AND 1.828 INCHES MAXIMUM1.828 INCHES MAXIMUM IN |
| Mating End Quantity | 11 |
| Contact Position Arrangement Style | 41 NUMBER 20 SINGLE MATING END41 NUMBER 20 SINGLE MATING END |
| Insert Position in Deg | 0.00.0 |
| Shell Material Document and Classification | QQ-A-591,A380 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-591,A380 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-367,T6 FED SPEC SINGLE MATERIAL RESPONSEQQ-A-367,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Direction | RIGHT-HANDRIGHT-HAND |
| Mounting Facility Thickness | 0.062 INCHES MINIMUM AND 0.062 INCHES MINIMUM AND 0.250 INCHES MAXIMUM0.250 INCHES MAXIMUM IN |
| Nominal Thread Size | 1.188 INCHES AND 1.188 INCHES AND 1.375 INCHES1.375 INCHES IN |
| Specification/standard Data | 96906-MS3474 GOVERNMENT STANDARD96906-MS3474 GOVERNMENT STANDARD |
| Polarization Method | KEYWAY OR MULTIPLE KEYWAYKEYWAY OR MULTIPLE KEYWAY |
| Environmental Protection | MOISTURE PROOF AND MOISTURE PROOF AND SALT WATER RESISTANT AND SALT WATER RESISTANT AND VIBRATION PROOFVIBRATION PROOF |
| Distance From Mounting Shoulder to Front Face | 0.721 INCHES MINIMUM AND 0.721 INCHES MINIMUM AND 0.772 INCHES MAXIMUM0.772 INCHES MAXIMUM IN |
| Thread Class | 2A2A |
| Test Data Document | 81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 1818 |
| Threaded Device Type | BACK SHELL AND BACK SHELL AND MOUNTING BUSHINGMOUNTING BUSHING |
| Thread Series Designator | UNEFUNEF |
| Shell Material | ALUMINUM ALLOY 6061ALUMINUM ALLOY 6061 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MIL-C-26482 | 5/9 Secondary reference U.S. Government activity |
| MIL-DTL-26482 | 4/1 Identification reference U.S. Government activity |
| MS3474L20-41B | 2/2 Government specification standardization U.S. Government activity |
NSN 5935-01-106-0746 is a Connector Body,receptacle,electr, classified under FSC 5935, Connectors, Electrical. Status: active.
Key specifications for 5935-01-106-0746: Connector Locking Method: BAYONET PINBAYONET PIN; Shell Type: SOLIDSOLID; Body Style: STRAIGHT SHAPE, EXTERNAL COUPLINGSTRAIGHT SHAPE, EXTERNAL COUPLING; Nominal Thread Length: 0.290 INCHES0.290 INCHES IN. 23 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.