The Connector Body,receptacle,electr, cataloged under National Stock Number 5935-01-103-1795, is classified within Federal Supply Class 5935 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Sae International Dba Sae International. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 7 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-103-1795 |
| Primary Part Number | M81511/01EF01A1 |
| Item Name | Connector Body,receptacle,electr |
| FSC / FSG | 5935 / 59 — No Item Name Available |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Mating End Quantity | 11 |
| Body Style | STRAIGHT SHAPE, EXTERNAL COUPLINGSTRAIGHT SHAPE, EXTERNAL COUPLING |
| Environmental Protection | MOISTURE PROOF AND MOISTURE PROOF AND SALT WATER RESISTANT AND SALT WATER RESISTANT AND SHOCK PROOF AND SHOCK PROOF AND VIBRATION PROOFVIBRATION PROOF |
| Contact Position Arrangement Style | 18-85 SINGLE MATING END18-85 SINGLE MATING END |
| Shell Material | ALUMINUM ALLOYALUMINUM ALLOY |
| Nominal Thread Size | 1.125 INCHES1.125 INCHES IN |
| Distance From Mounting Shoulder to Front Face | 0.765 INCHES MINIMUM AND 0.765 INCHES MINIMUM AND 0.775 INCHES MAXIMUM0.775 INCHES MAXIMUM IN |
| Thread Series Designator | UNUN |
| Connector Locking Method | BAYONET PINBAYONET PIN |
| Shell Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSESQQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES |
| Shell Type | SOLIDSOLID |
| Threaded Device Type | BACK SHELLBACK SHELL |
| Center to Center Distance Between Mounting Facilities Parallel to Height | 1.057 INCHES MINIMUM AND 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM1.067 INCHES MAXIMUM IN |
| Thread Class | 2A2A |
| Test Data Document | 81349-MIL-C-81511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).81349-MIL-C-81511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Insert Position in Deg | 95.0 AND 95.0 AND 145.0 AND 145.0 AND 220.0 AND 220.0 AND 255.0255.0 |
| Thread Direction | RIGHT-HANDRIGHT-HAND |
| Specification/standard Data | 81349-MIL-C-81511/01 GOVERNMENT SPECIFICATION81349-MIL-C-81511/01 GOVERNMENT SPECIFICATION |
| Polarization Method | KEYWAY OR MULTIPLE KEYWAYKEYWAY OR MULTIPLE KEYWAY |
| Shell Surface Treatment | CADMIUM AND CADMIUM AND CHROMATECHROMATE |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 1.057 INCHES MINIMUM AND 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM1.067 INCHES MAXIMUM IN |
| Unthreaded Mounting Hole Diameter | 0.116 INCHES MINIMUM AND 0.116 INCHES MINIMUM AND 0.126 INCHES MAXIMUM0.126 INCHES MAXIMUM IN |
| Thread Quantity Per Inch | 2828 |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| SAE-AS81511/1 | Sae International Dba Sae International (USA) |
| MIL-C-81511/01 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M81511/01EF01A1 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M81511/01EF01A1 PRIMARY | Sae International Dba Sae International (USA) |
NSN 5935-01-103-1795 is a Connector Body,receptacle,electr, manufactured by Sae International Dba Sae International, classified under FSC 5935 (No Item Name Available). Status: active.
NSN 5935-01-103-1795 has 4 cross-referenced part numbers: SAE-AS81511/1 (Sae International Dba Sae International), MIL-C-81511/01 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M81511/01EF01A1 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M81511/01EF01A1 (Sae International Dba Sae International).
There are 7 known substitutes for 5935-01-103-1795: 5935-00-001-3165, 5935-00-001-5883, 5935-00-064-5470 and 4 more. Verify interchangeability with system specifications before substitution.
Key specifications for M81511/01EF01A1: Mating End Quantity: 11; Body Style: STRAIGHT SHAPE, EXTERNAL COUPLINGSTRAIGHT SHAPE, EXTERNAL COUPLING; Environmental Protection: MOISTURE PROOF AND MOISTURE PROOF AND SALT WATER RESISTANT AND SALT WATER RESISTANT AND SHOCK PROOF AND SHOCK PROOF AND VIBRATION PROOFVIBRATION PROOF; Contact Position Arrangement Style: 18-85 SINGLE MATING END18-85 SINGLE MATING END. 26 total characteristics are documented in the Federal Logistics Information System.