The Connector Body,receptacle,electr, cataloged under National Stock Number 5935-01-101-7833, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-101-7833 |
| Primary Part Number | MS3412D20-27B |
| Item Name | Connector Body,receptacle,electr |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Connector Locking Method | EXTERNALLY THREADED SHELLEXTERNALLY THREADED SHELL |
| Shell Type | SOLIDSOLID |
| Body Style | STRAIGHT SHAPE, EXTERNAL COUPLINGSTRAIGHT SHAPE, EXTERNAL COUPLING |
| Nominal Thread Length | 0.290 INCHES AND 0.290 INCHES AND 0.625 INCHES0.625 INCHES IN |
| Mating End Quantity | 11 |
| Contact Position Arrangement Style | 20-27 SINGLE MATING END20-27 SINGLE MATING END |
| Shell Surface Treatment | CADMIUM AND CADMIUM AND CHROMATE AND CHROMATE AND NICKELNICKEL |
| Insert Position in Deg | 0.00.0 |
| Unthreaded Mounting Hole Diameter | 0.115 INCHES MINIMUM AND 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM0.130 INCHES MAXIMUM IN |
| Center to Center Distance Between Mounting Facilities Parallel to Height | 1.140 INCHES MINIMUM AND 1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM1.172 INCHES MAXIMUM IN |
| Shell Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSEQQ-P-416,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE |
| Thread Direction | RIGHT-HANDRIGHT-HAND |
| Nominal Thread Size | 1.188 INCHES AND 1.188 INCHES AND 1.250 INCHES1.250 INCHES IN |
| Specification/standard Data | 96906-MS3412 GOVERNMENT STANDARD96906-MS3412 GOVERNMENT STANDARD |
| Operating Temp Rating | -55.0 CELSIUS MINIMUM AND -55.0 CELSIUS MINIMUM AND 200.0 CELSIUS MAXIMUM200.0 CELSIUS MAXIMUM DEGC |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 1.140 INCHES MINIMUM AND 1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM1.172 INCHES MAXIMUM IN |
| Polarization Method | KEYWAY OR MULTIPLE KEYWAYKEYWAY OR MULTIPLE KEYWAY |
| Environmental Protection | MOISTURE PROOF AND MOISTURE PROOF AND SALT WATER RESISTANT AND SALT WATER RESISTANT AND VIBRATION PROOF AND VIBRATION PROOF AND SHOCK RESISTANT AND SHOCK RESISTANT AND COLD RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND HEAT RESISTANT AND EXPLOSION PROOFEXPLOSION PROOF |
| Distance From Mounting Shoulder to Front Face | 0.750 INCHES MINIMUM AND 0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM0.781 INCHES MAXIMUM IN |
| Thread Class | 2A2A |
| Test Data Document | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 1818 |
| Threaded Device Type | BACK SHELL AND BACK SHELL AND COUPLING FACILITYCOUPLING FACILITY |
| Thread Series Designator | UNEFUNEF |
| Insert Material | RUBBER SILICONE CLASS Q SINGLE MATING ENDRUBBER SILICONE CLASS Q SINGLE MATING END |
| Shell Material | ALUMINUMALUMINUM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS3412D20-27B PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| MS3412D20-27B | 5/9 Secondary reference U.S. Government activity |
| MIL-C-5015 | 5/9 Secondary reference U.S. Government activity |
| SAE-AS50151 | 3/1 Design control — primary reference Sae International Dba Sae International |
NSN 5935-01-101-7833 is a Connector Body,receptacle,electr, manufactured by Sae International Dba Sae International, classified under FSC 5935, Connectors, Electrical. Status: active.
NSN 5935-01-101-7833 has 1 manufacturer part number on file: MS3412D20-27B (Sae International Dba Sae International).
Key specifications for MS3412D20-27B: Overall Height: 1.469 INCHES MINIMUM AND 1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM1.531 INCHES MAXIMUM IN; Connector Locking Method: EXTERNALLY THREADED SHELLEXTERNALLY THREADED SHELL; Shell Type: SOLIDSOLID; Body Style: STRAIGHT SHAPE, EXTERNAL COUPLINGSTRAIGHT SHAPE, EXTERNAL COUPLING. 26 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.