The Connector,plug,electrical, cataloged under National Stock Number 5935-01-064-2402, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-064-2402 |
| Primary Part Number | MS3106A18-21P |
| Item Name | Connector,plug,electrical |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Contact Maximum Current Rating in Amps | 41.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| Connector Locking Method | INTERNALLY THREADED COUPLING RING |
| Shell Type | SOLID |
| Body Style | STRAIGHT SHAPE, INTERNAL COUPLING |
| Terminal Type | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| Nominal Thread Length | 0.375 INCHES AND 0.531 INCHES IN |
| Overall Diameter | 1.344 INCHES NOMINAL IN |
| Mating End Quantity | 1 |
| Precious Material | GOLD AND SILVER |
| Contact Position Arrangement Style | 18-21 SINGLE MATING END |
| Shell Surface Treatment | CADMIUM |
| Insert Position in Deg | 0.0 |
| Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| Included Contact Quantity | 3 SINGLE MATING END SINGLE CONTACT GROUPING |
| Shell Surface Treatment Document and Classification | QQ-P-416,TYPE 3,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 1.000 INCHES AND 1.125 INCHES IN |
| Included Contact Type | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| Contact Maximum AC Voltage Rating in Volts | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| Polarization Method | KEY, MULTIPLE KEY GROOVE |
| Environmental Protection | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| Precious Material and Location | CONTACT SURFACE GOLD AND CONTACT SURFACE SILVER |
| Contact Removability | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Class | 2A AND 2B A |
| Test Data Document | 81349-MIL-C-00515 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 18 AND 20 |
| Contact Surface Treatment | GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| Threaded Device Type | BACK SHELL AND COUPLING FACILITY |
| Thread Series Designator | UNEF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS3106A18-21P PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| SAE-AS50151 | 3/1 Design control — primary reference Sae International Dba Sae International |
| MIL-C-005015 | 5/9 Secondary reference U.S. Government activity |
| MS3106A18-21P | 5/9 Secondary reference U.S. Government activity |
NSN 5935-01-064-2402 is a Connector,plug,electrical, manufactured by Sae International Dba Sae International, classified under FSC 5935, Connectors, Electrical. Status: active.
NSN 5935-01-064-2402 has 1 manufacturer part number on file: MS3106A18-21P (Sae International Dba Sae International).
Key specifications for MS3106A18-21P: Contact Maximum Current Rating in Amps: 41.0 SINGLE MATING END SINGLE CONTACT GROUPING; Connector Locking Method: INTERNALLY THREADED COUPLING RING; Shell Type: SOLID; Body Style: STRAIGHT SHAPE, INTERNAL COUPLING. 29 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.