The Connector,plug,electrical, cataloged under National Stock Number 5935-01-057-0441, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-01-057-0441 |
| Primary Part Number | GC810MW2 |
| Item Name | Connector,plug,electrical |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Manufacturer | Northrop Grumman Systems Corporation |
| Status | ACTIVE |
| Connector Locking Method | BAYONET LATCH |
| Shell Type | SOLID |
| Body Style | STRAIGHT SHAPE, INTERNAL COUPLING |
| Terminal Type | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| Contact Material | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| Overall Diameter | 0.440 INCHES NOMINAL IN |
| Mating End Quantity | 1 |
| Precious Material | GOLD AND SILVER |
| Contact Position Arrangement Style | TPS SINGLE MATING END |
| Shell Surface Treatment | GOLD AND SILVER |
| Precious Material and Weight | 0.105 GOLD GRAINS, TROY AND 0.105 SILVER GRAINS, TROY |
| Shell Material Document and Classification | QQ-B-626,COM+22,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| Included Contact Quantity | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| Shell Surface Treatment Document and Classification | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-S-365,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE |
| Included Contact Type | COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| Contact Maximum AC Voltage Rating in Volts | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| Polarization Method | SHELL |
| Contact Surface Treatment Document and Classification | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| Connector Cable Strain Relief Method | COMPRESSION NUT |
| Environmental Protection | HEAT RESISTANT |
| Precious Material and Location | CONTACT AND BODY SURFACES GOLD AND CONTACT AND BODY SURFACES SILVER |
| Contact Removability | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| Cable Entrance Diameter | 0.166 INCHES NOMINAL IN |
| Contact Material Document and Classification | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| Contact Surface Treatment | GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| Contact Maximum DC Voltage Rating in Volts | 1500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| Radio Frequency Type Contact Characteristic Impedance in Ohms | 0.015 SINGLE MATING END SINGLE CONTACT GROUPING |
| Insert Material | PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| PL50-4-2G | Trompeter Electronics, Inc. (USA) |
| 7298-3 | Microwave Devices Inc (USA) |
| GC810MW2 PRIMARY | Northrop Grumman Systems Corporation (USA) |
| Reference | Meaning |
|---|---|
| PL50-4/GOLD | 5/9 Secondary reference Trompeter Electronics, Inc. |
| PL50-4T/GOLD | 5/9 Secondary reference Trompeter Electronics, Inc. |
NSN 5935-01-057-0441 is a Connector,plug,electrical, manufactured by Northrop Grumman Systems Corporation, classified under FSC 5935, Connectors, Electrical. Status: active.
NSN 5935-01-057-0441 has 3 manufacturer part numbers on file: PL50-4-2G (Trompeter Electronics, Inc.), 7298-3 (Microwave Devices Inc), GC810MW2 (Northrop Grumman Systems Corporation).
Key specifications for GC810MW2: Connector Locking Method: BAYONET LATCH; Shell Type: SOLID; Body Style: STRAIGHT SHAPE, INTERNAL COUPLING; Terminal Type: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING. 29 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.