PartsTable TECHNICAL DATA SHEET
NSN 5935-00-953-2507Government record, cited

Connector, Plug, Electrical5935-00-953-2507

NSN 5935-00-953-2507 · NIIN 009532507 · Part number K0A6-21-50SN
Itt Cannon Llc · FSC 5935 — Connectors, Electrical · FSG 59 — Electrical and Electronic Equipment Components · CAGE 71468
Government record, cited
NSN 5935-00-953-2507 — this item is cataloged by the U.S. Government under National Stock Number 5935-00-953-2507. Manufacturer of record part number: K0A6-21-50SN.
Also searched as  5935-00-953-2507 · 5935009532507 · NIIN 009532507 · 00-953-2507 · FSC 5935 Connectors, Electrical · CAGE 71468 · K0A6-21-50SN · 1780470-1 · CAK21993
Nearby stock numbers  ·
Features
  • Connector,plug,electrical — FSC 5935
  • Contact Maximum Current Rating in Amps: 7.5 SINGLE MATING END SINGLE CONTACT GROUPING
  • Connector Locking Method: INTERNALLY THREADED COUPLING NUT
  • Shell Type: HOOD, SIDE OPENING
  • Terminal Type: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
  • Contact Material: COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
  • Overall Diameter: 1.500 INCHES NOMINAL IN
  • Mating End Quantity: 1
Identification
  • NSN: 5935-00-953-2507
  • NIIN: 009532507
  • FSC: 5935 — Connectors, Electrical
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: K0A6-21-50SN
  • Manufacturer: Itt Cannon Llc
General Description

The Connector,plug,electrical, cataloged under National Stock Number 5935-00-953-2507, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Itt Cannon Llc. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5935-00-953-2507
Primary Part NumberK0A6-21-50SN
Item NameConnector,plug,electrical
FSC / FSG5935 / 59 — Connectors, Electrical
ManufacturerItt Cannon Llc
StatusACTIVE
Contact Maximum Current Rating in Amps7.5 SINGLE MATING END SINGLE CONTACT GROUPING
Connector Locking MethodINTERNALLY THREADED COUPLING NUT
Shell TypeHOOD, SIDE OPENING
Terminal TypeSOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
Contact MaterialCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
Overall Diameter1.500 INCHES NOMINAL IN
Mating End Quantity1
Precious MaterialGOLD AND SILVER
Contact Position Arrangement Style"50,21-50" SINGLE MATING END
Shell Surface TreatmentCADMIUM AND CHROMATE
Insert Position in Deg0.0
Terminal LocationBACK SINGLE MATING END SINGLE CONTACT GROUPING
Included Contact Quantity50 SINGLE MATING END SINGLE CONTACT GROUPING
Thread DirectionRIGHT-HAND
Nominal Thread Size1.312 INCHES IN
Body Length1.031 INCHES NOMINAL IN
Included Contact TypeROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
Polarization MethodKEYWAY OR MULTIPLE KEYWAY
Connector Cable Strain Relief MethodCABLE CLAMP
Precious Material and LocationCONTACT SURFACE GOLD AND CONTACT SURFACE SILVER
Contact RemovabilityNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
Test Data Document81349-MIL-C-25955 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Cable Entrance Diameter0.312 INCHES MAXIMUM IN
Thread Quantity Per Inch6
Contact Surface TreatmentGOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
Threaded Device TypeCOUPLING FACILITY
Thread Series DesignatorUNS
Insert MaterialPLASTIC POLYAMIDE NYLON SINGLE MATING END
Shell MaterialALUMINUM ALLOY
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
K0A6-21-50SN Itt Industries Limited, Itt Cannon Uk (GBR)
K0A6-21-50SN PRIMARY Itt Cannon Llc (USA)
Reference documents
ReferenceMeaning
1780470-1 5/9 Secondary reference
Lockheed Martin Corporation Div Rms - Mitchel Field
CAK21993 5/9 Secondary reference
Itt Cannon Llc
K0A6-21-50SN 5/9 Secondary reference
Delcom Electronic Gmbh
No interchangeability data on file.
Other items in FSC 5935 — Connectors, Electrical
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5935-00-000-8180
5935-00-000-8180 · Item name not on file
5935-00-001-1344
5935-00-001-1344 · Item name not on file
5935-00-001-1347
5935-00-001-1347 · Item name not on file
5935-00-001-1350
5935-00-001-1350 · Item name not on file
5935-00-001-1351
5935-00-001-1351 · Item name not on file
5935-00-001-1353
5935-00-001-1353 · Item name not on file
5935-00-001-1627
BACKSHELL,ELECTRICAL CONNECTOR
5935-00-001-1628
5935-00-001-1628 · Item name not on file

Frequently Asked Questions

What is NSN 5935-00-953-2507?

NSN 5935-00-953-2507 is a Connector,plug,electrical, manufactured by Itt Cannon Llc, classified under FSC 5935, Connectors, Electrical. Status: active.

What part numbers are listed for NSN 5935-00-953-2507?

NSN 5935-00-953-2507 has 2 manufacturer part numbers on file: K0A6-21-50SN (Itt Industries Limited, Itt Cannon Uk), K0A6-21-50SN (Itt Cannon Llc).

What are the specifications of K0A6-21-50SN?

Key specifications for K0A6-21-50SN: Contact Maximum Current Rating in Amps: 7.5 SINGLE MATING END SINGLE CONTACT GROUPING; Connector Locking Method: INTERNALLY THREADED COUPLING NUT; Shell Type: HOOD, SIDE OPENING; Terminal Type: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5935-00-953-2507 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com