PartsTable TECHNICAL DATA SHEET
NSN 5935-00-879-8479Government record, cited

Shell, Electrical Connector5935-00-879-8479

NSN 5935-00-879-8479 · NIIN 008798479 · Part number MS17845-1
Sae International Dba Sae International · FSC 5935 — Connectors, Electrical · FSG 59 — Electrical and Electronic Equipment Components · CAGE 0U583
Government record, cited
NSN 5935-00-879-8479 — this item is cataloged by the U.S. Government under National Stock Number 5935-00-879-8479. Manufacturer of record part number: MS17845-1.
Also searched as  5935-00-879-8479 · 5935008798479 · NIIN 008798479 · 00-879-8479 · FSC 5935 Connectors, Electrical · CAGE 0U583 · MS17845-1 · SAE-AS81790 · AS 81790
Nearby stock numbers  ·
Features
  • Shell,electrical Connector — FSC 5935
  • Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S)
  • Center to Center Distance Between Mounting Facilities Parallel to Length: 3.748 INCHES MINIMUM AND 3.752 INCHES MAXIMUM IN
  • Unthreaded Mounting Hole Diameter: 0.203 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
  • Style Designator: RACK AND PANEL FRONT AND REAR MOUNTING
  • Specification/standard Data: 81343-MS17845 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
  • Surface Treatment: CHROMATE ZINC
  • Center to Center Distance Between Mounting Facilities Parallel to Width: 2.748 INCHES MINIMUM AND 2.752 INCHES MAXIMUM IN
Identification
  • NSN: 5935-00-879-8479
  • NIIN: 008798479
  • FSC: 5935 — Connectors, Electrical
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: MS17845-1
  • Manufacturer: Sae International Dba Sae International
General Description

The Shell,electrical Connector, cataloged under National Stock Number 5935-00-879-8479, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5935-00-879-8479
Primary Part NumberMS17845-1
Item NameShell,electrical Connector
FSC / FSG5935 / 59 — Connectors, Electrical
ManufacturerSae International Dba Sae International
StatusACTIVE
Mounting Facility Type and Quantity4 UNTHREADED HOLE(S)
Center to Center Distance Between Mounting Facilities Parallel to Length3.748 INCHES MINIMUM AND 3.752 INCHES MAXIMUM IN
Unthreaded Mounting Hole Diameter0.203 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
Style DesignatorRACK AND PANEL FRONT AND REAR MOUNTING
Specification/standard Data81343-MS17845 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Surface TreatmentCHROMATE ZINC
Center to Center Distance Between Mounting Facilities Parallel to Width2.748 INCHES MINIMUM AND 2.752 INCHES MAXIMUM IN
Test Data Document81343-AS 81790 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialALUMINUM ALLOY LOCATION NOT OTHERWISE SPECIFIED
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5935-01-030-1838MS90362-3 POSSIBLE MATCH
CONNECTOR,RECEPTACLE,ELECTRICAL
Possible match (shared part number)Sae International Dba Sae International
5935-01-050-7485MS3506-1 POSSIBLE MATCH
CONNECTOR,RECEPTACLE,ELECTRICAL
Possible match (shared part number)Sae International Dba Sae International
Cross-Reference Index
Part NumberManufacturer
MS17845-1 PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
MS17845-1 5/9 Secondary reference
U.S. Government activity
SAE-AS81790 3/1 Design control — primary reference
Sae International Dba Sae International
AS 81790 5/9 Secondary reference
Sae International Dba Sae International
MS17845-1 5/9 Secondary reference
U.S. Government activity
AS 81790 5/9 Secondary reference
U.S. Government activity
MIL-C-81790 5/9 Secondary reference
U.S. Government activity
Related Parts
5935-01-030-1838POSSIBLE MATCH
CONNECTOR,RECEPTACLE,ELECTRICAL
MS90362-3
5935-01-050-7485POSSIBLE MATCH
CONNECTOR,RECEPTACLE,ELECTRICAL
MS3506-1

Frequently Asked Questions

What is NSN 5935-00-879-8479?

NSN 5935-00-879-8479 is a Shell,electrical Connector, manufactured by Sae International Dba Sae International, classified under FSC 5935, Connectors, Electrical. Status: active.

What part numbers are listed for NSN 5935-00-879-8479?

NSN 5935-00-879-8479 has 1 manufacturer part number on file: MS17845-1 (Sae International Dba Sae International).

What NSN replaces 5935-00-879-8479?

2 possible matches (shared part number, not a government interchangeability claim): 5935-01-030-1838, 5935-01-050-7485. Verify interchangeability with system specifications before substitution.

What are the specifications of MS17845-1?

Key specifications for MS17845-1: Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Overall Height: 1.610 INCHES MINIMUM AND 1.670 INCHES MAXIMUM IN; Center to Center Distance Between Mounting Facilities Parallel to Length: 3.748 INCHES MINIMUM AND 3.752 INCHES MAXIMUM IN; Unthreaded Mounting Hole Diameter: 0.203 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN. 9 specifications are documented in the U.S. Government catalog.

Is NSN 5935-00-879-8479 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com