The Connector,receptacle,electrical, cataloged under National Stock Number 5935-00-855-2589, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-00-855-2589 |
| Primary Part Number | MS3130E19-50P |
| Item Name | Connector,receptacle,electrical |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Connector Locking Method | DETENT |
| Shell Type | SOLID |
| Body Style | STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL |
| Terminal Type | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| Mating End Quantity | 1 |
| Precious Material | GOLD |
| Contact Position Arrangement Style | 27-5 SINGLE MATING END |
| Shell Surface Treatment | CADMIUM |
| Insert Position in Deg | 0.0 |
| Unthreaded Mounting Hole Diameter | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Precious Material and Weight | 0.019 GOLD GRAINS, TROY |
| Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| Center to Center Distance Between Mounting Facilities Parallel to Height | 0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM IN |
| Included Contact Quantity | 19 SINGLE MATING END SINGLE CONTACT GROUPING |
| Shell Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Specification/standard Data | 96906-MS3130E19-50P GOVERNMENT STANDARD |
| Included Contact Type | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| Contact Maximum AC Voltage Rating in Volts | 600.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM IN |
| Polarization Method | KEY, MULTIPLE KEY GROOVE |
| Environmental Protection | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| Precious Material and Location | CONTACT SURFACES GOLD |
| Distance From Mounting Shoulder to Front Face | 0.542 INCHES NOMINAL IN |
| Contact Removability | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| Test Data Document | 81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Contact Surface Treatment | GOLD AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| Shell Material | ALUMINUM ALLOY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS3130E19-50P PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| MS3130E19-50P | 5/9 Secondary reference U.S. Government activity |
| MILC26482 | 5/9 Secondary reference U.S. Government activity |
| MS3130E19-50P | 5/9 Secondary reference U.S. Government activity |
| AS81703 | 5/9 Secondary reference Sae International Dba Sae International |
| AS81703 | 5/9 Secondary reference U.S. Government activity |
| SAE-AS81703 | 3/1 Design control — primary reference Sae International Dba Sae International |
NSN 5935-00-855-2589 is a Connector,receptacle,electrical, manufactured by Sae International Dba Sae International, classified under FSC 5935, Connectors, Electrical. Status: active.
NSN 5935-00-855-2589 has 1 manufacturer part number on file: MS3130E19-50P (Sae International Dba Sae International).
Key specifications for MS3130E19-50P: Overall Height: 1.208 INCHES MAXIMUM IN; Connector Locking Method: DETENT; Shell Type: SOLID; Body Style: STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL. 27 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.