The Connector,receptacle,electrical, cataloged under National Stock Number 5935-00-511-3894, is classified within Federal Supply Class 5935 (Connectors, Electrical) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5935-00-511-3894 |
| Primary Part Number | MS3402D28-12P |
| Item Name | Connector,receptacle,electrical |
| FSC / FSG | 5935 / 59 — Connectors, Electrical |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Contact Maximum Current Rating in Amps | 22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| Connector Locking Method | EXTERNALLY THREADED SHELL |
| Shell Type | SOLID |
| Body Style | STRAIGHT SHAPE, EXTERNAL COUPLING |
| Terminal Type | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| Mating End Quantity | 1 |
| Contact Position Arrangement Style | 28-12 SINGLE MATING END |
| Shell Surface Treatment | CADMIUM |
| Insert Position in Deg | 0.0 |
| Unthreaded Mounting Hole Diameter | 0.142 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN |
| Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| Center to Center Distance Between Mounting Facilities Parallel to Height | 1.562 INCHES NOMINAL IN |
| Included Contact Quantity | 26 SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 1.750 INCHES IN |
| Specification/standard Data | 81349-MIL-C-5015 GOVERNMENT SPECIFICATION |
| Included Contact Type | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| Contact Maximum AC Voltage Rating in Volts | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 1.562 INCHES NOMINAL IN |
| Polarization Method | KEYWAY OR MULTIPLE KEYWAY |
| Environmental Protection | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| Distance From Mounting Shoulder to Front Face | 0.812 INCHES MINIMUM AND 0.843 INCHES MAXIMUM IN |
| Contact Removability | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| Thread Class | 2A A |
| Test Data Document | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 18 |
| Threaded Device Type | COUPLING FACILITY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS3402D28-12P PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| MS3402D28-12P | 5/9 Secondary reference U.S. Government activity |
| SAE-AS50151 | 3/1 Design control — primary reference Sae International Dba Sae International |
| MILC005015 | 5/9 Secondary reference U.S. Government activity |
NSN 5935-00-511-3894 is a Connector,receptacle,electrical, manufactured by Sae International Dba Sae International, classified under FSC 5935, Connectors, Electrical. Status: active.
NSN 5935-00-511-3894 has 1 manufacturer part number on file: MS3402D28-12P (Sae International Dba Sae International).
Key specifications for MS3402D28-12P: Overall Height: 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN; Contact Maximum Current Rating in Amps: 22.0 SINGLE MATING END SINGLE CONTACT GROUPING; Connector Locking Method: EXTERNALLY THREADED SHELL; Shell Type: SOLID. 27 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.