PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5934810
5934810 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include material: STEEL PIN/STUD, temp_rating: 250.0 FAHRENHEIT DEGF, overall_width: 0.750 INCHES NOMINAL IN, inside_diameter: 2.690 INCHES MINIMUM AND 2.930 INCHES MAXIMUM IN, special_features: WIRE CLAMP WITH T-BOLD AND SPRING (TENSION 240 LBS) HOLD CLAMP TIGHT; CLAMP IS DUAL WIRE (.1" X .025") LBS, style_designator: WIRE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-473-5537, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5934810
NSN: 4730-01-473-5537
FSC: 4730
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
materialSTEEL PIN/STUD
temp_rating250.0 FAHRENHEIT DEGF
overall_width0.750 INCHES NOMINAL IN
inside_diameter2.690 INCHES MINIMUM AND 2.930 INCHES MAXIMUM IN
special_featuresWIRE CLAMP WITH T-BOLD AND SPRING (TENSION 240 LBS) HOLD CLAMP TIGHT; CLAMP IS DUAL WIRE (.1" X .025") LBS
style_designatorWIRE
fastening_device_typeSPRING TENSION
end_item_identification2320-01-412-0143
NSN4730-01-473-5537
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 5934810 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL NUT
•
FASTENING DEVICE TYPE: SPRING TENSION
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATION2320-01-412-0143
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIALSTEEL NUT
MATERIALSTEEL COMP 301 BUCKLE/CLIP
SPECIAL FEATURESWIRE CLAMP WITH T-BOLD AND SPRING (TENSION 240 LBS) HOLD CLAMP TIGHT; CLAMP IS DUAL WIRE (.1" X .025") LBS
FASTENING DEVICE TYPESPRING TENSION
MATERIALSTEEL COMP 201 BAND
MATERIALSTEEL PIN/STUD
INSIDE DIAMETER2.690 INCHES MINIMUM AND 2.930 INCHES MAXIMUM IN
TEMP RATING250.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
66743Interchangeable
interchangeable cross-reference
interchangeable
5M-2894Interchangeable
interchangeable cross-reference
interchangeable
208A357G06Interchangeable
interchangeable cross-reference
interchangeable
MS18063-11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5934810?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5934810?
5934810 is a CLAMP,HOSE.
What parts can replace 5934810?
There are 4 known substitutes for 5934810: 66743, 5M-2894, 208A357G06 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5934810?
5934810 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-473-5537. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5934810

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026