PartsTable TECHNICAL DATA SHEET
NSN 5930-00-937-9984Government record, cited

Switch, Rotary5930-00-937-9984

NSN 5930-00-937-9984 · NIIN 009379984 · Part number 10516592
Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate · FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components · CAGE 19200
Government record, cited
NSN 5930-00-937-9984 — this item is cataloged by the U.S. Government under National Stock Number 5930-00-937-9984. Manufacturer of record part number: 10516592.
Also searched as  5930-00-937-9984 · 5930009379984 · NIIN 009379984 · 00-937-9984 · FSC 5930 Switches · CAGE 19200 · 10516592 · SPEC11152 · 5930009379984 · SPEC11152 · 28-GM-3MODSHAFT
Nearby stock numbers  ·
Features
  • Switch,rotary — FSC 5930
  • Shaft Type: ROUND, FLATTED SINGLE ACTUATOR
  • Shaft Diameter: 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM SINGLE ACTUATOR IN
  • Switch Contact Basic Design: NONPILE-UP SYMMETRICAL
  • Terminal Type: TAB, SOLDER LUG
  • Overall Diameter: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
  • First Flat Length: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN
  • Precious Material: RHODIUM AND SILVER
Identification
  • NSN: 5930-00-937-9984
  • NIIN: 009379984
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 10516592
  • Manufacturer: Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
General Description

The Switch,rotary, cataloged under National Stock Number 5930-00-937-9984, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-00-937-9984
Primary Part Number10516592
Item NameSwitch,rotary
FSC / FSG5930 / 59 — Switches
ManufacturerCombat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
StatusACTIVE
Shaft TypeROUND, FLATTED SINGLE ACTUATOR
Shaft Diameter0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM SINGLE ACTUATOR IN
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL
Terminal TypeTAB, SOLDER LUG
Overall Diameter0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
First Flat Length0.250 INCHES NOMINAL SINGLE ACTUATOR IN
Precious MaterialRHODIUM AND SILVER
Contact Load Current Rating1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
Mounting MethodTHREADED BUSHING SINGLE MOUNTING FACILITY
Thread Length0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
Pole Quantity2 SINGLE SECTION REAR
Style DesignatorMINIATURE, BUSHING MOUNT
Individual Section Quantity1
Nominal Thread Size0.250 INCHES SINGLE MOUNTING FACILITY IN
Shaft Length0.625 INCHES NOMINAL SINGLE ACTUATOR IN
Switch Actuator Stop Device TypeFIXED STOP SINGLE ACTUATOR
Contact Switching ActionMAKES BEFORE BREAKS SINGLE SECTION REAR
Contact Voltage Rating in Volts0.250 AC AT SEA LEVEL
Precious Material and LocationWIPERS RHODIUM AND CONTACTS SILVER
Operating Temp Range-55.0 TO 125.0 CELSIUS DEGC
Thread Class2A SINGLE MOUNTING FACILITY A
Switch Actuator Positioning Increment36.0 DEGREES SINGLE ACTUATOR
Switch Actuator Indexing Position Quantity3 SINGLE ACTUATOR
Thread Series DesignatorUNF SINGLE MOUNTING FACILITY
Flat Height0.094 INCHES NOMINAL SINGLE ACTUATOR IN
Throw Quantity3 SINGLE SECTION REAR
Hazardous Locations/environmental ProtectionEXPLOSION PROOF
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
10516592 PRIMARY Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA)
SPEC11152 Shallco, Inc (USA)
28-GM-3MODSHAFT Shallco, Inc (USA)
Reference documents
ReferenceMeaning
SPEC11152 5/9 Secondary reference
Meggitt (new Hampshire), Inc
5930009379984 5/9 Secondary reference
E.c.a Etablissement Centrald'approvisionnement Des Forces Armee
28-GM-3MODSHAFT 5/9 Secondary reference
Meggitt (new Hampshire), Inc
No interchangeability data on file.
Other items in FSC 5930 — Switches
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5930-00-000-0117
SWITCH,PRESSURE
5930-00-001-1407
5930-00-001-1407 · Item name not on file
5930-00-001-1890
SWITCH,SENSITIVE
5930-00-001-2571
SWITCH,ROTARY
5930-00-001-2575
5930-00-001-2575 · Item name not on file
5930-00-001-2580
5930-00-001-2580 · Item name not on file
5930-00-001-2608
5930-00-001-2608 · Item name not on file
5930-00-001-2609
5930-00-001-2609 · Item name not on file

Frequently Asked Questions

What is NSN 5930-00-937-9984?

NSN 5930-00-937-9984 is a Switch,rotary, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate, classified under FSC 5930, Switches. Status: active.

What part numbers are listed for NSN 5930-00-937-9984?

NSN 5930-00-937-9984 has 3 manufacturer part numbers on file: 10516592 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate), SPEC11152 (Shallco, Inc), 28-GM-3MODSHAFT (Shallco, Inc).

What are the specifications of 10516592?

Key specifications for 10516592: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Terminal Type: TAB, SOLDER LUG. 27 specifications are documented in the U.S. Government catalog.

Is NSN 5930-00-937-9984 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com