The Switch,rotary, cataloged under National Stock Number 5930-00-889-5918, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-00-889-5918 |
| Primary Part Number | 5-11221-760 |
| Item Name | Switch,rotary |
| FSC / FSG | 5930 / 59 — Switches |
| Manufacturer | Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch |
| Status | ACTIVE |
| Shaft Type | ROUND, PARALLEL FLATTED, THREADED HOLE SINGLE ACTUATOR |
| Shaft Diameter | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Switch Contact Basic Design | NONPILE-UP SYMMETRICAL |
| Nonturn Device Radius | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM AT 3:00 OCLOCK IN |
| Terminal Type | TAB, SOLDER LUG |
| First Flat Length | 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Detent Rotational Torque Range | +1.000 TO 5.000 INCH-POUNDS SINGLE ACTUATOR IN |
| Contact Load Current Rating | 0.5 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| Contact Load Current Rating | 1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| Mounting Method | THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY |
| Thread Length | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| Pole Quantity | 1 SINGLE SECTION REAR |
| Style Designator | CIRCULAR WAFER, BUSHING MOUNT |
| Individual Section Quantity | 1 |
| Nonturn Device Type | TAB AT 3:00 OCLOCK |
| Nominal Thread Size | 0.375 INCHES SINGLE MOUNTING FACILITY IN |
| Shaft Length | 0.718 INCHES MINIMUM AND 0.733 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Switch Actuator Stop Device Type | FIXED STOP SINGLE ACTUATOR |
| Width Between Flats | 0.187 INCHES MINIMUM AND 0.189 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Contact Switching Action | MAKES BEFORE BREAKS SINGLE SECTION REAR |
| Contact Voltage Rating in Volts | 28.0 DC AT SEA LEVEL |
| Contact Voltage Rating in Volts | 110.0 AC AT SEA LEVEL |
| Operating Temp Range | -40.0 TO 85.0 CELSIUS DEGC |
| Thread Class | 2A SINGLE MOUNTING FACILITY A |
| Test Data Document | 80063-SMD415284 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| Switch Actuator Positioning Increment | 45.0 DEGREES SINGLE ACTUATOR |
| Switch Actuator Indexing Position Quantity | 2 SINGLE ACTUATOR |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 5-11221-760 | Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch (USA) |
| Reference | Meaning |
|---|---|
| 818164 | 5/9 Secondary reference U.S. Government activity |
| SM-D-415284 | 3/2 Design control — primary reference U.S. Government activity |
| 5930008895918 | 5/9 Secondary reference E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
| 220214-AA1 | 5/9 Secondary reference Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch |
| 220219-AA1 | 5/9 Secondary reference Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch |
NSN 5930-00-889-5918 is a Switch,rotary, manufactured by Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch, classified under FSC 5930, Switches. Status: active.
NSN 5930-00-889-5918 has 1 manufacturer part number on file: 5-11221-760 (Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch).
Key specifications for 5-11221-760: Shaft Type: ROUND, PARALLEL FLATTED, THREADED HOLE SINGLE ACTUATOR; Overall Height: 0.995 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN; Shaft Diameter: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL. 27 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.