The Switch,toggle, cataloged under National Stock Number 5930-00-615-7891, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Army Weapons Command Attn Amswe-Ree-S. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 9 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 4 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5930-00-615-7891 |
| Primary Part Number | 502716 |
| Item Name | Switch,toggle |
| FSC / FSG | 5930 / 59 — Switches |
| Manufacturer | Army Weapons Command Attn Amswe-Ree-S |
| Status | CANCELLED |
| Actuator Diameter | 0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN |
| Inclosure Type | FULLY INCLOSED |
| Body Style | HOLE MOUNT |
| Center to Center Distance Between Mounting Facilities Parallel to Length | 1.797 INCHES MINIMUM AND 1.827 INCHES MAXIMUM IN |
| Actuator Style | ROUND |
| Mounting Method | UNTHREADED HOLE(S) |
| Body Width | 1.520 INCHES MAXIMUM IN |
| Nominal Thread Size | 0.138 INCHES IN |
| Actuator Position-Action Relationship | UP POSITION MAINTAINED AND DOWN POSITION MAINTAINED AND CENTER POSITION MAINTAINED |
| Body Length | 1.520 INCHES MAXIMUM IN |
| Nonpile-Up Contact Arrangement | 2 POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED SINGLE SWITCH UNIT |
| Maximum Voltage Rating in Volts | 220.0 AC AND 250.0 DC |
| Test Data Document | 81349-MIL-S-3950 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 32 |
| Terminal Type and Quantity | 6 SCREW |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Actuator Height | 0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN |
| Contact Load Current Rating at Maximum Rated Voltage | 500.000 MILLIAMPERES RESISTIVE DC AND 8.000 AMPERES RESISTIVE AC |
| Hazardous Locations/environmental Protection | SUBMERSIBLE |
| Acquisition Status | CANCELLED |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 502716 | Army Weapons Command Attn Amswe-Ree-S (USA) |
| 487574 | Stewart-Warner Corporation (USA) |
| 487574 | Meggitt Troy Inc (USA) |
| 532TS1-1 | Satair A/s (DNK) |
| Reference | Meaning |
|---|---|
| 02000-3048 | 5/9 Secondary reference U.S. Government activity |
| MS25103-21 | 5/9 Secondary reference U.S. Government activity |
| 8700K15 | 5/9 Secondary reference U.S. Government activity |
| 425440-1 | 5/2 Secondary reference U.S. Government activity |
| ST55P | 5/1 Secondary reference U.S. Government activity |
| 532TS1-1 | 3/2 Design control — primary reference U.S. Government activity |
| 5930006157891 | 5/9 Secondary reference E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
| 2000-3048 | 5/9 Secondary reference U.S. Government activity |
| 8700K14 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5930-00-615-7891 is a Switch,toggle, manufactured by Army Weapons Command Attn Amswe-Ree-S, classified under FSC 5930, Switches. Status: cancelled.
NSN 5930-00-615-7891 has 4 manufacturer part numbers on file: 502716 (Army Weapons Command Attn Amswe-Ree-S), 487574 (Stewart-Warner Corporation), 487574 (Meggitt Troy Inc), 532TS1-1 (Satair A/s).
4 possible matches (shared part number, not a government interchangeability claim): 5930-01-231-8435, 5340-01-353-6812, 5975-01-486-8962. Verify interchangeability with system specifications before substitution.
Key specifications for 502716: Actuator Diameter: 0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN; Inclosure Type: FULLY INCLOSED; Body Style: HOLE MOUNT; Center to Center Distance Between Mounting Facilities Parallel to Length: 1.797 INCHES MINIMUM AND 1.827 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5930-00-615-7891 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.