The Switch,rotary, cataloged under National Stock Number 5930-01-698-4086, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-01-698-4086 |
| Item Name | Switch,rotary |
| FSC / FSG | 5930 / 59 — Switches |
| Status | ACTIVE |
| Shaft Type | ROUND SINGLE ACTUATOR |
| Shaft Diameter | 0.002 INCHES MINIMUM AND 0.125 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Terminal Type | PRINTED CIRCUIT |
| Overall Diameter | 0.562 INCHES NOMINAL IN |
| Precious Material | GOLD AND SILVER |
| Contact Load Current Rating | 125.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE |
| Mounting Method | THREADED STUD(S) SINGLE MOUNTING FACILITY |
| Thread Length | 0.015 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| Pole Quantity | 1 SINGLE SECTION REAR |
| Style Designator | SNAP OR LINE |
| Nominal Thread Size | 0.25 INCHES SINGLE MOUNTING FACILITY IN |
| Contact Voltage Rating in Volts | 30.0 DC AT ALTITUDE |
| Thread Class | 2A SINGLE MOUNTING FACILITY A |
| Thread Quantity Per Inch | 28 SINGLE MOUNTING FACILITY |
| Switch Actuator Indexing Position Quantity | 2 SINGLE ACTUATOR |
| Thread Series Designator | UNF SINGLE MOUNTING FACILITY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 51D30-01-1-AJN | 3/2 Design control — primary reference U.S. Government activity |
NSN 5930-01-698-4086 is a Switch,rotary, classified under FSC 5930, Switches. Status: active.
Key specifications for 5930-01-698-4086: Shaft Type: ROUND SINGLE ACTUATOR; Shaft Diameter: 0.002 INCHES MINIMUM AND 0.125 INCHES MAXIMUM SINGLE ACTUATOR IN; Terminal Type: PRINTED CIRCUIT; Overall Diameter: 0.562 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.