PartsTable TECHNICAL DATA SHEET
NSN 5930-01-438-3465Government record, cited

Switch, Thermostatic5930-01-438-3465

NSN 5930-01-438-3465 · NIIN 014383465
FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5930-01-438-3465 · 5930014383465 · NIIN 014383465 · 01-438-3465 · FSC 5930 Switches · MIL-PRF-24236/2 · MIL-S-24236/2 · M24236/2-ECLGKF
Nearby stock numbers  ·
Features
  • Switch,thermostatic — FSC 5930
  • Body Diameter: 0.670 INCHES MAXIMUM IN
  • Width Across Flats: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
  • Frequency in Hertz: 60.0 FIRST VOLTAGE
  • Terminal Type: WIRE LEAD
  • Contact Load Current Rating: 2.0 AMPERES RESISTIVE LOAD FIRST VOLTAGE
  • Contact Load Current Rating: 5.0 AMPERES RESISTIVE LOAD SECOND VOLTAGE
  • Style Designator: CYLINDRICAL W/FLANGE
Identification
  • NSN: 5930-01-438-3465
  • NIIN: 014383465
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Switch,thermostatic, cataloged under National Stock Number 5930-01-438-3465, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-01-438-3465
Item NameSwitch,thermostatic
FSC / FSG5930 / 59 — Switches
StatusACTIVE
Body Diameter0.670 INCHES MAXIMUM IN
Width Across Flats0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
Frequency in Hertz60.0 FIRST VOLTAGE
Terminal TypeWIRE LEAD
Contact Load Current Rating2.0 AMPERES RESISTIVE LOAD FIRST VOLTAGE
Contact Load Current Rating5.0 AMPERES RESISTIVE LOAD SECOND VOLTAGE
Style DesignatorCYLINDRICAL W/FLANGE
Specification/standard Data81349-MIL-S-24236/2 GOVERNMENT SPECIFICATION
Body Length2.500 INCHES NOMINAL IN
Operating Temp Rating-75.0 FAHRENHEIT MINIMUM AND 500.0 FAHRENHEIT MAXIMUM DEGF
Nonpile-Up Contact Arrangement1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION
Media for Which DesignedGAS OR LIQUID
Test Data Document81349-MIL-S-24236 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Contact Stimulus Rating170.00 ACTUATION POINT NOMINAL DEGREES FAHRENHEIT AND 140.00 DEACTUATION POINT NOMINAL DEGREES FAHRENHEIT
Contact AdjustabilityACTUATION POINT NOT ADJUSTABLE AND DEACTUATION POINT NOT ADJUSTABLE
Contact Voltage Rating in Volts28.0 DC AT SEA LEVEL SECOND VOLTAGE
Contact Voltage Rating in Volts115.0 AC AT SEA LEVEL FIRST VOLTAGE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MIL-PRF-24236/2 4/1 Identification reference
U.S. Government activity
MIL-S-24236/2 5/9 Secondary reference
U.S. Government activity
M24236/2-ECLGKF 2/2 Government specification standardization
U.S. Government activity

Frequently Asked Questions

What is NSN 5930-01-438-3465?

NSN 5930-01-438-3465 is a Switch,thermostatic, classified under FSC 5930, Switches. Status: active.

What are the specifications of 5930-01-438-3465?

Key specifications for 5930-01-438-3465: Body Diameter: 0.670 INCHES MAXIMUM IN; Width Across Flats: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN; Frequency in Hertz: 60.0 FIRST VOLTAGE; Terminal Type: WIRE LEAD. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5930-01-438-3465 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com