The Switch,rotary, cataloged under National Stock Number 5930-01-416-8205, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings). Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-01-416-8205 |
| Primary Part Number | 89103-2BA560 |
| Item Name | Switch,rotary |
| FSC / FSG | 5930 / 59 — Switches |
| Manufacturer | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings) |
| Status | ACTIVE |
| Shaft Type | ROUND, FLATTED SINGLE ACTUATOR |
| Shaft Diameter | 0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Switch Contact Basic Design | NONPILE-UP SYMMETRICAL |
| Terminal Type | TAB, SOLDER LUG |
| Overall Diameter | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN |
| First Flat Length | 0.417 INCHES MINIMUM AND 0.457 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Rotor Through Connection Quantity | 1 SINGLE SECTION |
| Contact Load Current Rating | 500.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| Contact Load Current Rating | 500.0 MILLIAMPERES RESISTIVE LOAD AND 250.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| Mounting Method | THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY |
| Thread Length | 0.242 INCHES MINIMUM AND 0.282 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| Pole Quantity | 1 SINGLE SECTION FRONT |
| Style Designator | TAP, CIRCULAR, BUSHING MOUNT |
| Individual Section Quantity | 1 |
| Nonturn Device Type | FLATTED BUSHING AT 3:00 OCLOCK |
| Nonturn Device Type | FLATTED BUSHING AT 9:00 OCLOCK |
| Nominal Thread Size | 0.250 INCHES SINGLE MOUNTING FACILITY IN |
| Shaft Length | 0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Specification/standard Data | 81349-MIL-S-3786/39 GOVERNMENT SPECIFICATION |
| Switch Actuator Stop Device Type | FIXED STOP SINGLE ACTUATOR |
| Contact Switching Action | BREAKS BEFORE MAKES SINGLE SECTION REAR |
| Contact Voltage Rating in Volts | 115.0 AC AT SEA LEVEL |
| Contact Voltage Rating in Volts | 28.0 DC AT SEA LEVEL |
| Thread Class | 2A SINGLE MOUNTING FACILITY A |
| Test Data Document | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Switch Actuator Positioning Increment | 30.0 DEGREES SINGLE ACTUATOR |
| Switch Actuator Indexing Position Quantity | 4 SINGLE ACTUATOR |
| Thread Series Designator | UNEF SINGLE MOUNTING FACILITY |
| Flat Height | 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 89103-2BA560 PRIMARY | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings) (USA) |
| Reference | Meaning |
|---|---|
| ES6408-11 | 5/9 Secondary reference Drs Sustainment Systems, Inc. |
| 89103 | D/9 Drawing number reference only Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings) |
NSN 5930-01-416-8205 is a Switch,rotary, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings), classified under FSC 5930, Switches. Status: active.
NSN 5930-01-416-8205 has 1 manufacturer part number on file: 89103-2BA560 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings)).
Key specifications for 89103-2BA560: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Terminal Type: TAB, SOLDER LUG. 29 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.