PartsTable TECHNICAL DATA SHEET
NSN 5930-01-392-0608Government record, cited

Switch, Toggle5930-01-392-0608

NSN 5930-01-392-0608 · NIIN 013920608 · Part number 260933
Lockheed Martin Corp Electronics and Missiles Div · FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components · CAGE 09205
Government record, cited
NSN 5930-01-392-0608 — this item is cataloged by the U.S. Government under National Stock Number 5930-01-392-0608. Manufacturer of record part number: 260933.
Also searched as  5930-01-392-0608 · 5930013920608 · NIIN 013920608 · 01-392-0608 · FSC 5930 Switches · CAGE 09205 · 260933
Nearby stock numbers  ·
Features
  • Switch,toggle — FSC 5930
  • Bushing Length: 0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
  • Actuator Diameter: 0.237 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
  • Inclosure Type: FULLY INCLOSED
  • Body Style: BUSHING MOUNT
  • Actuator Style: ROUND
  • Mounting Method: THREADED BUSHING
  • Body Width: 0.635 INCHES MAXIMUM IN
Identification
  • NSN: 5930-01-392-0608
  • NIIN: 013920608
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 260933
  • Manufacturer: Lockheed Martin Corp Electronics and Missiles Div
General Description

The Switch,toggle, cataloged under National Stock Number 5930-01-392-0608, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Lockheed Martin Corp Electronics and Missiles Div. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-01-392-0608
Primary Part Number260933
Item NameSwitch,toggle
FSC / FSG5930 / 59 — Switches
ManufacturerLockheed Martin Corp Electronics and Missiles Div
StatusACTIVE
Bushing Length0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
Actuator Diameter0.237 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
Inclosure TypeFULLY INCLOSED
Body StyleBUSHING MOUNT
Actuator StyleROUND
Mounting MethodTHREADED BUSHING
Body Width0.635 INCHES MAXIMUM IN
Body Height0.890 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
Features ProvidedACTUATOR SEAL
Nominal Thread Size0.469 INCHES IN
Actuator Position-Action RelationshipUP POSITION MAINTAINED AND DOWN POSITION MAINTAINED
Body Length1.270 INCHES MAXIMUM IN
Nonpile-Up Contact Arrangement1 POLE, DOUBLE THROW, BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
Test Data Document81349-MIL-S-3950 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch32
Terminal Type and Quantity2 SCREW
Thread Series DesignatorUNS
Actuator Height0.665 INCHES MINIMUM AND 0.695 INCHES MAXIMUM IN
Contact Load Current Rating at Maximum Rated Voltage20.000 AMPERES RESISTIVE DC AND 10.000 AMPERES INDUCTIVE DC AND 5.000 AMPERES LAMP DC AND 15.000 AMPERES RESISTIVE AC AND 10.000 AMPERES INDUCTIVE AC AND 3.000 AMPERES LAMP AC
Hazardous Locations/environmental ProtectionVAPORTIGHT
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL B — Remove Demilitarization Key Points
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
260933 PRIMARY Lockheed Martin Corp Electronics and Missiles Div (USA)

Frequently Asked Questions

What is NSN 5930-01-392-0608?

NSN 5930-01-392-0608 is a Switch,toggle, manufactured by Lockheed Martin Corp Electronics and Missiles Div, classified under FSC 5930, Switches. Status: active.

What part numbers are listed for NSN 5930-01-392-0608?

NSN 5930-01-392-0608 has 1 manufacturer part number on file: 260933 (Lockheed Martin Corp Electronics and Missiles Div).

What are the specifications of 260933?

Key specifications for 260933: Bushing Length: 0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN; Actuator Diameter: 0.237 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN; Inclosure Type: FULLY INCLOSED; Body Style: BUSHING MOUNT. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5930-01-392-0608 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 5930-01-392-0608?

NSN 5930-01-392-0608 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com