The Switch,sensitive, cataloged under National Stock Number 5930-01-345-1036, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-01-345-1036 |
| Item Name | Switch,sensitive |
| FSC / FSG | 5930 / 59 — Switches |
| Status | ACTIVE |
| Actuator Diameter | 5.0 MILLIMETERS NOMINAL MM |
| Inclosure Type | FULLY INCLOSED |
| Body Style | HOLE MOUNTED |
| Center to Center Distance Between Mounting Facilities Parallel to Length | 21.9 MILLIMETERS MINIMUM AND 22.1 MILLIMETERS MAXIMUM MM |
| Actuator Style | ROUND |
| Mounting Method | UNTHREADED HOLE(S) |
| Body Width | 11.0 MILLIMETERS MINIMUM AND 15.0 MILLIMETERS MAXIMUM MM |
| Body Height | 30.3 MILLIMETERS NOMINAL MM |
| Unthreaded Mounting Hole Diameter | 3.8 MILLIMETERS MINIMUM AND 4.8 MILLIMETERS MAXIMUM MM |
| Body Length | 30.0 MILLIMETERS NOMINAL MM |
| Nonpile-Up Contact Arrangement | 2 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION SINGLE SWITCH UNIT |
| Terminal Type and Quantity | 4 QUICK DISCONNECT, MALE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| XP52-211 | 5/9 Secondary reference Unimac Co Inc |
| 340200 | 3/9 Design control — primary reference Unimac Co Inc |
NSN 5930-01-345-1036 is a Switch,sensitive, classified under FSC 5930, Switches. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 4730-01-463-9243. Verify interchangeability with system specifications before substitution.
Key specifications for 5930-01-345-1036: Actuator Diameter: 5.0 MILLIMETERS NOMINAL MM; Inclosure Type: FULLY INCLOSED; Body Style: HOLE MOUNTED; Center to Center Distance Between Mounting Facilities Parallel to Length: 21.9 MILLIMETERS MINIMUM AND 22.1 MILLIMETERS MAXIMUM MM. 12 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.