PartsTable TECHNICAL DATA SHEET
NSN 5930-01-340-5773Government record, cited

Switch, Toggle5930-01-340-5773

NSN 5930-01-340-5773 · NIIN 013405773 · Part number 07-4021
Huntron Inc · FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components · CAGE 57705
Government record, cited
NSN 5930-01-340-5773 — this item is cataloged by the U.S. Government under National Stock Number 5930-01-340-5773. Manufacturer of record part number: 07-4021.
Also searched as  5930-01-340-5773 · 5930013405773 · NIIN 013405773 · 01-340-5773 · FSC 5930 Switches · CAGE 57705 · 07-4021 · 8A1022 · 8A1022
Nearby stock numbers  ·
Features
  • Switch,toggle — FSC 5930
  • Bushing Length: 8.0 MILLIMETERS NOMINAL MM
  • Actuator Diameter: 3.0 MILLIMETERS NOMINAL MM
  • Inclosure Type: FULLY INCLOSED
  • Body Style: BUSHING MOUNT
  • Actuator Style: ROUND
  • Mounting Method: THREADED BUSHING
  • Body Width: 8.0 MILLIMETERS NOMINAL MM
Identification
  • NSN: 5930-01-340-5773
  • NIIN: 013405773
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 07-4021
  • Manufacturer: Huntron Inc
General Description

The Switch,toggle, cataloged under National Stock Number 5930-01-340-5773, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Huntron Inc. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-01-340-5773
Primary Part Number07-4021
Item NameSwitch,toggle
FSC / FSG5930 / 59 — Switches
ManufacturerHuntron Inc
StatusACTIVE
Bushing Length8.0 MILLIMETERS NOMINAL MM
Actuator Diameter3.0 MILLIMETERS NOMINAL MM
Inclosure TypeFULLY INCLOSED
Body StyleBUSHING MOUNT
Actuator StyleROUND
Mounting MethodTHREADED BUSHING
Body Width8.0 MILLIMETERS NOMINAL MM
Body Height9.0 MILLIMETERS NOMINAL MM
Nominal Thread Size0.250 INCHES IN
Actuator Position-Action RelationshipUP POSITION MAINTAINED AND DOWN POSITION MAINTAINED AND CENTER POSITION MAINTAINED
Body Length13.0 MILLIMETERS NOMINAL MM
Nonpile-Up Contact Arrangement1 POLE, DOUBLE THROW, BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
Precious Material and LocationCONTACT SURFACES SILVER
Maximum Voltage Rating in Volts125.0 AC
Thread Class2A A
Thread Quantity Per Inch40
MaterialPLASTIC CASE
Terminal Type and Quantity3 PRINTED CIRCUIT
Thread Series DesignatorUNS
Actuator Height10.0 MILLIMETERS NOMINAL MM
Contact Load Current Rating at Maximum Rated Voltage6.000 AMPERES RESISTIVE AC
Hazardous Locations/environmental ProtectionMOISTURE RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
07-4021 PRIMARY Huntron Inc (USA)
8A1022 Nidec Components Corporation (JPN)
Reference documents
ReferenceMeaning
8A1022 5/9 Secondary reference
Fujisoku Electric Co. Ltd

Frequently Asked Questions

What is NSN 5930-01-340-5773?

NSN 5930-01-340-5773 is a Switch,toggle, manufactured by Huntron Inc, classified under FSC 5930, Switches. Status: active.

What part numbers are listed for NSN 5930-01-340-5773?

NSN 5930-01-340-5773 has 2 manufacturer part numbers on file: 07-4021 (Huntron Inc), 8A1022 (Nidec Components Corporation).

What are the specifications of 07-4021?

Key specifications for 07-4021: Bushing Length: 8.0 MILLIMETERS NOMINAL MM; Overall Height: 32.3 MILLIMETERS NOMINAL MM; Actuator Diameter: 3.0 MILLIMETERS NOMINAL MM; Inclosure Type: FULLY INCLOSED. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5930-01-340-5773 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com