The Switch,toggle, cataloged under National Stock Number 5930-01-254-6609, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-01-254-6609 |
| Item Name | Switch,toggle |
| FSC / FSG | 5930 / 59 — Switches |
| Status | ACTIVE |
| Body Diameter | 0.530 INCHES MINIMUM AND 0.530 INCHES MINIMUM AND 0.570 INCHES MAXIMUM0.570 INCHES MAXIMUM IN |
| Inclosure Type | FULLY INCLOSEDFULLY INCLOSED |
| Actuator Width | 0.580 INCHES NOMINAL0.580 INCHES NOMINAL IN |
| Body Height | 1.170 INCHES MINIMUM AND 1.170 INCHES MINIMUM AND 1.210 INCHES MAXIMUM1.210 INCHES MAXIMUM IN |
| Actuator Length | 0.880 INCHES NOMINAL0.880 INCHES NOMINAL IN |
| Nonpile-Up Contact Arrangement | 2 POLE, DOUBLE THROW, TWO POSITIONS MOMENTARY SINGLE SWITCH UNIT |
| Maximum Voltage Rating in Volts | 28.0 DC28.0 DC |
| Terminal Type and Quantity | 6 TAB, SOLDER LUG |
| Actuator Height | 0.140 INCHES MINIMUM AND 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM0.180 INCHES MAXIMUM IN |
| Contact Load Current Rating at Maximum Rated Voltage | 5.000 AMPERES RESISTIVE DC AND 3.000 AMPERES INDUCTIVE DC |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 309-4312 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5930-01-254-6609 is a Switch,toggle, classified under FSC 5930, Switches. Status: active.
Key specifications for 5930-01-254-6609: Body Diameter: 0.530 INCHES MINIMUM AND 0.530 INCHES MINIMUM AND 0.570 INCHES MAXIMUM0.570 INCHES MAXIMUM IN; Inclosure Type: FULLY INCLOSEDFULLY INCLOSED; Actuator Width: 0.580 INCHES NOMINAL0.580 INCHES NOMINAL IN; Body Height: 1.170 INCHES MINIMUM AND 1.170 INCHES MINIMUM AND 1.210 INCHES MAXIMUM1.210 INCHES MAXIMUM IN. 10 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.