PartsTable TECHNICAL DATA SHEET
NSN 5930-01-224-9476Government record, cited

Switch, Rotary5930-01-224-9476

NSN 5930-01-224-9476 · NIIN 012249476 · Part number 355-147-046
L3harris Interstate Electronics Corporation · FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components · CAGE 07421
Government record, cited
NSN 5930-01-224-9476 — this item is cataloged by the U.S. Government under National Stock Number 5930-01-224-9476. Manufacturer of record part number: 355-147-046.
Also searched as  5930-01-224-9476 · 5930012249476 · NIIN 012249476 · 01-224-9476 · FSC 5930 Switches · CAGE 07421 · 355-147-046 · 9MS60-02-2-03N
Nearby stock numbers  ·
Features
  • Switch,rotary — FSC 5930
  • Shaft Type: ROUND, FLATTED SINGLE ACTUATOR
  • Shaft Diameter: 0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR IN
  • Switch Contact Basic Design: NONPILE-UP SYMMETRICAL
  • Nonturn Device Radius: 0.245 INCHES MINIMUM AND 0.275 INCHES MAXIMUM AT 3:00 OCLOCK IN
  • Terminal Type: TAB, SOLDER LUG
  • Overall Diameter: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
  • First Flat Length: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR IN
Identification
  • NSN: 5930-01-224-9476
  • NIIN: 012249476
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 355-147-046
  • Manufacturer: L3harris Interstate Electronics Corporation
General Description

The Switch,rotary, cataloged under National Stock Number 5930-01-224-9476, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is L3harris Interstate Electronics Corporation. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-01-224-9476
Primary Part Number355-147-046
Item NameSwitch,rotary
FSC / FSG5930 / 59 — Switches
ManufacturerL3harris Interstate Electronics Corporation
StatusACTIVE
Shaft TypeROUND, FLATTED SINGLE ACTUATOR
Shaft Diameter0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR IN
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL
Nonturn Device Radius0.245 INCHES MINIMUM AND 0.275 INCHES MAXIMUM AT 3:00 OCLOCK IN
Terminal TypeTAB, SOLDER LUG
Overall Diameter0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
First Flat Length0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR IN
Precious MaterialGOLD AND SILVER
Rotor Through Connection Quantity2 EACH SECTION
Contact Load Current Rating125.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL
Contact Load Current Rating75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
Mounting MethodTHREADED BUSHING SINGLE MOUNTING FACILITY
Thread Length0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
Pole Quantity2 EACH SECTION FRONT
Style DesignatorTAP, CIRCULAR, BUSHING MOUNT
Individual Section Quantity2
Nonturn Device TypeTAB AT 3:00 OCLOCK
Nominal Thread Size0.250 INCHES SINGLE MOUNTING FACILITY IN
Shaft Length0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM SINGLE ACTUATOR IN
Switch Actuator Stop Device TypeFIXED STOP SINGLE ACTUATOR
Contact Switching ActionBREAKS BEFORE MAKES EACH SECTION REAR
Contact Voltage Rating in Volts115.0 AC AT SEA LEVEL
Contact Voltage Rating in Volts28.0 DC AT SEA LEVEL
Precious Material and LocationCONTACT AND TERMINAL SURFACES GOLD AND CONTACT AND TERMINAL SURFACES SILVER
Thread Class2A SINGLE MOUNTING FACILITY A
Switch Actuator Positioning Increment60.0 DEGREES SINGLE ACTUATOR
Switch Actuator Indexing Position Quantity3 SINGLE ACTUATOR
Thread Series DesignatorUNEF SINGLE MOUNTING FACILITY
Flat Height0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM SINGLE ACTUATOR IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
355-147-046 L3harris Interstate Electronics Corporation (USA)
Reference documents
ReferenceMeaning
9MS60-02-2-03N 3/9 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5930 — Switches
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5930-00-000-0117
SWITCH,PRESSURE
5930-00-001-1407
5930-00-001-1407 · Item name not on file
5930-00-001-1890
SWITCH,SENSITIVE
5930-00-001-2571
SWITCH,ROTARY
5930-00-001-2575
5930-00-001-2575 · Item name not on file
5930-00-001-2580
5930-00-001-2580 · Item name not on file
5930-00-001-2608
5930-00-001-2608 · Item name not on file
5930-00-001-2609
5930-00-001-2609 · Item name not on file

Frequently Asked Questions

What is NSN 5930-01-224-9476?

NSN 5930-01-224-9476 is a Switch,rotary, manufactured by L3harris Interstate Electronics Corporation, classified under FSC 5930, Switches. Status: active.

What part numbers are listed for NSN 5930-01-224-9476?

NSN 5930-01-224-9476 has 1 manufacturer part number on file: 355-147-046 (L3harris Interstate Electronics Corporation).

What are the specifications of 355-147-046?

Key specifications for 355-147-046: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Nonturn Device Radius: 0.245 INCHES MINIMUM AND 0.275 INCHES MAXIMUM AT 3:00 OCLOCK IN. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5930-01-224-9476 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com