PartsTable TECHNICAL DATA SHEET
NSN 5930-01-118-9205Government record, cited

Switch, Pressure5930-01-118-9205

NSN 5930-01-118-9205 · NIIN 011189205
FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5930-01-118-9205 · 5930011189205 · NIIN 011189205 · 01-118-9205 · FSC 5930 Switches · MIL-S-9395/41 · M9395/41-AWNTP
Nearby stock numbers  ·
Features
  • Switch,pressure — FSC 5930
  • Width Across Flats: 0.816 INCHES NOMINAL IN
  • Contact Action Stimulus: INCREASE
  • Terminal Type: CONNECTOR, RECEPTACLE
  • Overall Diameter: 1.130 INCHES NOMINAL IN
  • Proof Pressure: 270.00 POUNDS PER SQUARE INCH GAGE LBS
  • Contact Load Current Rating: 1.0 AMPERES RESISTIVE LOAD SINGLE VOLTAGE
  • Mounting Method: INLET CONNECTION
Identification
  • NSN: 5930-01-118-9205
  • NIIN: 011189205
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Switch,pressure, cataloged under National Stock Number 5930-01-118-9205, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-01-118-9205
Item NameSwitch,pressure
FSC / FSG5930 / 59 — Switches
StatusACTIVE
Width Across Flats0.816 INCHES NOMINAL IN
Contact Action StimulusINCREASE
Terminal TypeCONNECTOR, RECEPTACLE
Overall Diameter1.130 INCHES NOMINAL IN
Proof Pressure270.00 POUNDS PER SQUARE INCH GAGE LBS
Contact Load Current Rating1.0 AMPERES RESISTIVE LOAD SINGLE VOLTAGE
Mounting MethodINLET CONNECTION
Thread Length0.729 INCHES MINIMUM AND 0.749 INCHES MAXIMUM SINGLE PRESSURE CONNECTION IN
Sensing Element Burst Pressure800.00 POUNDS PER SQUARE INCH LBS
Style DesignatorCYLINDRICAL
Outside Diameter0.562 INCHES NOMINAL SINGLE CONNECTION IN
Pressure Switch TypeGAGE
Features ProvidedHERMETICALLY SEALED CASE
Nominal Thread Size0.562 INCHES SINGLE PRESSURE CONNECTION IN
Specification/standard Data81349-MIL-S-9395/41 GOVERNMENT SPECIFICATION
Body Length1.960 INCHES NOMINAL IN
Pressure Connector TypeSWIVEL, PLAIN, THREADED EXTERNAL SINGLE CONNECTION
Operating Temp Rating-65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM DEGF
Nonpile-Up Contact Arrangement1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY
Media for Which DesignedGAS OR LIQUID
Thread Class3A SINGLE PRESSURE CONNECTION A
Test Data Document81349-MIL-S-9395 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Contact Stimulus Rating82.00 ACTUATION POINT NOMINAL POUNDS PER SQUARE INCH GAGE AND 68.00 DEACTUATION POINT NOMINAL POUNDS PER SQUARE INCH GAGE AND 14.00 DIFFERENTIAL POINT NOMINAL POUNDS PER SQUARE INCH GAGE
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF) SINGLE PRESSURE CONNECTION
Contact AdjustabilityACTUATION POINT NOT ADJUSTABLE AND DEACTUATION POINT NOT ADJUSTABLE
Contact Voltage Rating in Volts28.0 DC AT SEA LEVEL SINGLE VOLTAGE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL B — Remove Demilitarization Key Points
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MIL-S-9395/41 4/1 Identification reference
U.S. Government activity
M9395/41-AWNTP 2/2 Government specification standardization
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5930 — Switches
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5930-00-000-0117
SWITCH,PRESSURE
5930-00-001-1407
5930-00-001-1407 · Item name not on file
5930-00-001-1890
SWITCH,SENSITIVE
5930-00-001-2571
SWITCH,ROTARY
5930-00-001-2575
5930-00-001-2575 · Item name not on file
5930-00-001-2580
5930-00-001-2580 · Item name not on file
5930-00-001-2608
5930-00-001-2608 · Item name not on file
5930-00-001-2609
5930-00-001-2609 · Item name not on file

Frequently Asked Questions

What is NSN 5930-01-118-9205?

NSN 5930-01-118-9205 is a Switch,pressure, classified under FSC 5930, Switches. Status: active.

What are the specifications of 5930-01-118-9205?

Key specifications for 5930-01-118-9205: Width Across Flats: 0.816 INCHES NOMINAL IN; Contact Action Stimulus: INCREASE; Terminal Type: CONNECTOR, RECEPTACLE; Overall Diameter: 1.130 INCHES NOMINAL IN. 26 specifications are documented in the U.S. Government catalog.

Is NSN 5930-01-118-9205 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 5930-01-118-9205?

NSN 5930-01-118-9205 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com