PartsTable TECHNICAL DATA SHEET
NSN 5930-01-107-5042Government record, cited

Switch, Rotary5930-01-107-5042

NSN 5930-01-107-5042 · NIIN 011075042 · Part number CM36988N/P
Clarostat Sensors and Controls · FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components · CAGE 12697
Government record, cited
NSN 5930-01-107-5042 — this item is cataloged by the U.S. Government under National Stock Number 5930-01-107-5042. Manufacturer of record part number: CM36988N/P.
Also searched as  5930-01-107-5042 · 5930011075042 · NIIN 011075042 · 01-107-5042 · FSC 5930 Switches · CAGE 12697 · CM36988N/P · BE-30
Nearby stock numbers  ·
Features
  • Switch,rotary — FSC 5930
  • Shaft Type: ROUND SINGLE ACTUATOR
  • Shaft Diameter: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN
  • Switch Contact Basic Design: NONPILE-UP SYMMETRICAL
  • Nonturn Device Radius: 0.437 INCHES NOMINAL AT 6:00 OCLOCK IN
  • Terminal Type: TAB, SOLDER LUG
  • Overall Diameter: 0.953 INCHES NOMINAL IN
  • Detent Rotational Torque Range: +0.500 TO 16.000 INCH-OUNCES SINGLE ACTUATOR IN
Identification
  • NSN: 5930-01-107-5042
  • NIIN: 011075042
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: CM36988N/P
  • Manufacturer: Clarostat Sensors and Controls
General Description

The Switch,rotary, cataloged under National Stock Number 5930-01-107-5042, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Clarostat Sensors and Controls. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-01-107-5042
Primary Part NumberCM36988N/P
Item NameSwitch,rotary
FSC / FSG5930 / 59 — Switches
ManufacturerClarostat Sensors and Controls
StatusACTIVE
Shaft TypeROUND SINGLE ACTUATOR
Shaft Diameter0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL
Nonturn Device Radius0.437 INCHES NOMINAL AT 6:00 OCLOCK IN
Terminal TypeTAB, SOLDER LUG
Overall Diameter0.953 INCHES NOMINAL IN
Detent Rotational Torque Range+0.500 TO 16.000 INCH-OUNCES SINGLE ACTUATOR IN
Contact Load Current Rating3.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
Contact Load Current Rating1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
Mounting MethodTHREADED BUSHING SINGLE MOUNTING FACILITY
Thread Length0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
Pole Quantity1 SINGLE SECTION REAR
Style DesignatorSNAP OR LINE
Individual Section Quantity1
Nonturn Device TypeTAB AT 6:00 OCLOCK
Features ProvidedMETALLIC INCLOSURE
Nominal Thread Size0.375 INCHES SINGLE MOUNTING FACILITY IN
Shaft Length0.125 INCHES NOMINAL SINGLE ACTUATOR IN
Switch Actuator Stop Device TypeFIXED STOP SINGLE ACTUATOR
Contact Switching ActionMAKES BEFORE BREAKS, BREAKS BEFORE MAKES SINGLE SECTION REAR
Contact Voltage Rating in Volts125.0 AC AT SEA LEVEL
Contact Voltage Rating in Volts250.0 DC AT SEA LEVEL
Thread Class2A SINGLE MOUNTING FACILITY A
Switch Actuator Positioning Increment30.0 DEGREES SINGLE ACTUATOR
Switch Actuator Indexing Position Quantity2 SINGLE ACTUATOR
Thread Series DesignatorUNEF SINGLE MOUNTING FACILITY
Throw Quantity2 SINGLE SECTION REAR
Hazardous Locations/environmental ProtectionDUSTPROOF
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
CM36988N/P PRIMARY Clarostat Sensors and Controls (USA)
Reference documents
ReferenceMeaning
BE-30 5/1 Secondary reference
Clarostat Sensors and Controls
No interchangeability data on file.
Other items in FSC 5930 — Switches
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5930-00-000-0117
SWITCH,PRESSURE
5930-00-001-1407
5930-00-001-1407 · Item name not on file
5930-00-001-1890
SWITCH,SENSITIVE
5930-00-001-2571
SWITCH,ROTARY
5930-00-001-2575
5930-00-001-2575 · Item name not on file
5930-00-001-2580
5930-00-001-2580 · Item name not on file
5930-00-001-2608
5930-00-001-2608 · Item name not on file
5930-00-001-2609
5930-00-001-2609 · Item name not on file

Frequently Asked Questions

What is NSN 5930-01-107-5042?

NSN 5930-01-107-5042 is a Switch,rotary, manufactured by Clarostat Sensors and Controls, classified under FSC 5930, Switches. Status: active.

What part numbers are listed for NSN 5930-01-107-5042?

NSN 5930-01-107-5042 has 1 manufacturer part number on file: CM36988N/P (Clarostat Sensors and Controls).

What are the specifications of CM36988N/P?

Key specifications for CM36988N/P: Shaft Type: ROUND SINGLE ACTUATOR; Shaft Diameter: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Nonturn Device Radius: 0.437 INCHES NOMINAL AT 6:00 OCLOCK IN. 28 specifications are documented in the U.S. Government catalog.

Is NSN 5930-01-107-5042 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com