The Switch,rotary, cataloged under National Stock Number 5930-01-101-8615, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings). Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-01-101-8615 |
| Primary Part Number | L02953 |
| Item Name | Switch,rotary |
| FSC / FSG | 5930 / 59 — Switches |
| Manufacturer | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) |
| Status | ACTIVE |
| Shaft Type | ROUND, FLATTED SINGLE ACTUATOR |
| Shaft Diameter | 0.250 INCHES NOMINAL SINGLE ACTUATOR IN |
| Switch Contact Basic Design | NONPILE-UP SYMMETRICAL |
| Terminal Type | TAB, SOLDER LUG |
| Overall Diameter | 1.000 INCHES MINIMUM AND 1.306 INCHES MAXIMUM IN |
| First Flat Length | 0.250 INCHES NOMINAL SINGLE ACTUATOR IN |
| Detent Rotational Torque Range | +1.750 TO 7.000 INCH-POUNDS SINGLE ACTUATOR IN |
| Rotor Through Connection Quantity | 1 EACH SECTION |
| Contact Load Current Rating | 75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| Contact Load Current Rating | 250.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| Mounting Method | THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY |
| Thread Length | 0.437 INCHES NOMINAL SINGLE MOUNTING FACILITY IN |
| Criticality Code Justification | FEAT |
| Pole Quantity | 1 EACH SECTION FRONT |
| Style Designator | TAP, CIRCULAR, BUSHING MOUNT |
| Individual Section Quantity | 10 |
| Nonturn Device Type | SLOTTED BUSHING AT 3:00 OCLOCK |
| Nominal Thread Size | 0.375 INCHES SINGLE MOUNTING FACILITY IN |
| Shaft Length | 0.437 INCHES NOMINAL SINGLE ACTUATOR IN |
| Switch Actuator Stop Device Type | FIXED STOP SINGLE ACTUATOR |
| Contact Switching Action | BREAKS BEFORE MAKES EACH SECTION REAR |
| Contact Voltage Rating in Volts | 115.0 AC AT SEA LEVEL |
| Contact Voltage Rating in Volts | 28.0 DC AT SEA LEVEL |
| Operating Temp Range | -65.0 TO 125.0 CELSIUS DEGC |
| Thread Class | 2A SINGLE MOUNTING FACILITY A |
| Switch Actuator Positioning Increment | 36.0 DEGREES SINGLE ACTUATOR |
| Switch Actuator Indexing Position Quantity | 7 SINGLE ACTUATOR |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | Y |
| Part Number | Manufacturer |
|---|---|
| L02953 PRIMARY | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
| Reference | Meaning |
|---|---|
| M3786/4-5578 | 5/1 Secondary reference U.S. Government activity |
NSN 5930-01-101-8615 is a Switch,rotary, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings), classified under FSC 5930, Switches. Status: active.
NSN 5930-01-101-8615 has 1 manufacturer part number on file: L02953 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)).
1 possible match (shared part number, not a government interchangeability claim): 5930-01-261-7763. Verify interchangeability with system specifications before substitution.
Key specifications for L02953: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Terminal Type: TAB, SOLDER LUG. 27 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.