PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

SL1008Switch,slide

Safran Power Usa, Llc · NSN 5930-01-098-3558 · FSC 5930 · No Item Name Available
Verified by PartsTable
NSN 5930-01-098-3558 — this item is cataloged by the U.S. Government under National Stock Number 5930-01-098-3558. Primary manufacturer part number: SL1008.
Features
  • Switch,slide — FSC 5930
  • Body Length: 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
  • Body Width: 0.370 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
  • Actuator Position-Action Relationship: UP POSITION MAINTAINED AND DOWN POSITION MAINTAINED
  • Mounting Method: PRINTED CIRCUIT
  • Actuator Length: 0.045 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
  • Actuator Width: 0.055 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
  • Actuator Height: 0.050 INCHES NOMINAL IN
Applications
  • Circuit control and protection
  • Equipment power management
  • Signal routing
  • Applications requiring Plastic Case construction
General Description

The Switch,slide, cataloged under National Stock Number 5930-01-098-3558, is classified within Federal Supply Class 5930 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Safran Power Usa, Llc. Government technical data includes 26 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-01-098-3558
Primary Part NumberSL1008
Item NameSwitch,slide
FSC / FSG5930 / 59 — No Item Name Available
ManufacturerSafran Power Usa, Llc
StatusACTIVE
Body Length0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
Body Width0.370 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
Actuator Position-Action RelationshipUP POSITION MAINTAINED AND DOWN POSITION MAINTAINED
Mounting MethodPRINTED CIRCUIT
Actuator Length0.045 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
Actuator Width0.055 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
Actuator Height0.050 INCHES NOMINAL IN
Maximum Voltage Rating in Volts6.0 DC AND 24.0 DC
Actuator StyleRECTANGULAR
Switch Actuator Quantity8
Nonpile-Up Contact Arrangement1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED FIFTH SWITCH UNIT
MaterialPLASTIC CASE
Nonpile-Up Contact Arrangement1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED THIRD SWITCH UNIT
Nonpile-Up Contact Arrangement1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED SECOND SWITCH UNIT
Precious Material and LocationTERMINAL AND CONTACT SURFACES GOLD
Specification/standard Data81349-MIL-S-83504/3 GOVERNMENT SPECIFICATION
Contact Load Current Rating at Maximum Rated Voltage100.0 MILLIAMPERES RESISTIVE DC AND 25.0 MILLIAMPERES RESISTIVE DC
Terminal Type and Quantity16 PRINTED CIRCUIT
Nonpile-Up Contact Arrangement1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED SIXTH SWITCH UNIT
Nonpile-Up Contact Arrangement1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED FIRST SWITCH UNIT
Nonpile-Up Contact Arrangement1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED EIGHTH SWITCH UNIT
Test Data Document81349-MIL-S-83504 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Nonpile-Up Contact Arrangement1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED FOURTH SWITCH UNIT
Nonpile-Up Contact Arrangement1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED SEVENTH SWITCH UNIT
Body StylePRINTED CIRCUIT
Body Height0.230 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 2
5930-01-112-0046 INTERCHANGEABLE
Switch,toggle
5930-01-311-0613 INTERCHANGEABLE
Switch,toggle
Cross-Reference Index
Part NumberManufacturer
SL1008 Safran Power Usa, Llc (USA)
MIL-S-83504 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
M83504/03-008 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Related Parts
5930-01-112-0046INTERCHANGEABLE
SWITCH,TOGGLE
5930-01-311-0613INTERCHANGEABLE
SWITCH,TOGGLE

Frequently Asked Questions

What is NSN 5930-01-098-3558?

NSN 5930-01-098-3558 is a Switch,slide, manufactured by Safran Power Usa, Llc, classified under FSC 5930 (No Item Name Available). Status: active.

What are the part numbers for NSN 5930-01-098-3558?

NSN 5930-01-098-3558 has 3 cross-referenced part numbers: SL1008 (Safran Power Usa, Llc), MIL-S-83504 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M83504/03-008 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).

What NSN replaces 5930-01-098-3558?

There are 2 known substitutes for 5930-01-098-3558: 5930-01-112-0046, 5930-01-311-0613. Verify interchangeability with system specifications before substitution.

What are the specifications of SL1008?

Key specifications for SL1008: Overall Length: 0.880 INCHES NOMINAL IN; Body Length: 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN; Overall Height: 0.450 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN; Body Width: 0.370 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN. 30 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com