The Switch,pressure, cataloged under National Stock Number 5930-01-036-3616, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-01-036-3616 |
| Item Name | Switch,pressure |
| FSC / FSG | 5930 / 59 — Switches |
| Status | ACTIVE |
| Width Across Flats | 0.562 INCHES NOMINAL IN |
| Contact Action Stimulus | INCREASE |
| Terminal Type | WIRE LEAD |
| Overall Diameter | 0.675 INCHES MAXIMUM IN |
| Proof Pressure | 500.00 POUNDS PER SQUARE INCH GAGE LBS |
| Sensing Element Burst Pressure | 1000.00 POUNDS PER SQUARE INCH GAGE LBS |
| Pressure Switch Type | GAGE |
| Operating Temp Rating | -20.0 FAHRENHEIT MINIMUM AND 150.0 FAHRENHEIT MAXIMUM DEGF |
| Nonpile-Up Contact Arrangement | 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
| Media for Which Designed | GAS OR LIQUID |
| Contact Stimulus Rating | 60.00 ACTUATION POINT MINIMUM POUNDS PER SQUARE INCH GAGE AND 27.00 DEACTUATION POINT NOMINAL POUNDS PER SQUARE INCH GAGE |
| Contact Adjustability | DEACTUATION POINT NOT ADJUSTABLE AND ACTUATION POINT NOT ADJUSTABLE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| HK02ZB029 | 7/2 Vendor item drawing reference Carrier Corp |
| 20PS113BA06-7G027D | 5/9 Secondary reference U.S. Government activity |
| 20PS113BA06-7G027D | 3/9 Design control — primary reference Texas Instruments Inc Control Products Div |
NSN 5930-01-036-3616 is a Switch,pressure, classified under FSC 5930, Switches. Status: active.
Key specifications for 5930-01-036-3616: Width Across Flats: 0.562 INCHES NOMINAL IN; Contact Action Stimulus: INCREASE; Terminal Type: WIRE LEAD; Overall Diameter: 0.675 INCHES MAXIMUM IN. 12 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.