The Switch,push, cataloged under National Stock Number 5930-01-034-6697, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-01-034-6697 |
| Item Name | Switch,push |
| FSC / FSG | 5930 / 59 — Switches |
| Status | ACTIVE |
| Inclosure Type | FULLY INCLOSED |
| Center to Center Distance Between Cover Plate Mounting Holes | 0.704 INCHES MINIMUM AND 0.713 INCHES MAXIMUM IN |
| Body Style | HOLE MOUNT |
| Center to Center Distance Between Mounting Facilities Parallel to Length | 0.975 INCHES MAXIMUM IN |
| Actuator Style | RECTANGULAR |
| Mounting Method | UNTHREADED HOLE(S) |
| Actuator Width | 0.128 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN |
| Body Width | 0.450 INCHES MAXIMUM IN |
| Body Length | 1.650 INCHES MAXIMUM IN |
| Actuator Length | 0.128 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN |
| Nonpile-Up Contact Arrangement | 2 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION SINGLE SWITCH UNIT |
| Maximum Voltage Rating in Volts | 120.0 AC |
| Terminal Type and Quantity | 4 TAB, SOLDER LUG |
| Actuator Height | 0.671 INCHES MINIMUM AND 0.731 INCHES MAXIMUM IN |
| Contact Load Current Rating at Maximum Rated Voltage | 5.000 AMPERES RESISTIVE AC |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| A9T5762-6-3 | 5/9 Secondary reference Te Connectivity Corporation |
| 260-1709-00 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5930-01-034-6697 is a Switch,push, classified under FSC 5930, Switches. Status: active.
Key specifications for 5930-01-034-6697: Inclosure Type: FULLY INCLOSED; Center to Center Distance Between Cover Plate Mounting Holes: 0.704 INCHES MINIMUM AND 0.713 INCHES MAXIMUM IN; Body Style: HOLE MOUNT; Center to Center Distance Between Mounting Facilities Parallel to Length: 0.975 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.