The Switch,rotary, cataloged under National Stock Number 5930-01-034-4886, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 11 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-01-034-4886 |
| Item Name | Switch,rotary |
| FSC / FSG | 5930 / 59 — Switches |
| Status | ACTIVE |
| Shaft Type | ROUND, FLATTED SINGLE ACTUATOR |
| Shaft Diameter | 0.250 INCHES NOMINAL SINGLE ACTUATOR IN |
| Switch Contact Basic Design | NONPILE-UP SYMMETRICAL |
| Nonturn Device Radius | 0.375 INCHES NOMINAL AT 3:00 OCLOCK IN |
| Terminal Type | TAB, SOLDER LUG |
| Overall Diameter | 1.430 INCHES MAXIMUM IN |
| First Flat Length | 0.250 INCHES NOMINAL SINGLE ACTUATOR IN |
| Detent Rotational Torque Range | +0.500 TO 2.500 INCH-POUNDS SINGLE ACTUATOR IN |
| Contact Load Current Rating | 250.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| Contact Load Current Rating | 750.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| Mounting Method | THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY |
| Thread Length | 0.437 INCHES NOMINAL SINGLE MOUNTING FACILITY IN |
| Pole Quantity | 1 EACH SECTION FRONT |
| Style Designator | TAP, CIRCULAR, BUSHING MOUNT |
| Individual Section Quantity | 2 |
| Nonturn Device Type | TAB AT 3:00 OCLOCK |
| Nominal Thread Size | 0.375 INCHES SINGLE MOUNTING FACILITY IN |
| Shaft Length | 0.438 INCHES NOMINAL SINGLE ACTUATOR IN |
| Specification/standard Data | 81349-MIL-S-3786/28 GOVERNMENT SPECIFICATION |
| Switch Actuator Stop Device Type | FIXED STOP SINGLE ACTUATOR |
| Contact Switching Action | BREAKS BEFORE MAKES EACH SECTION FRONT |
| Contact Voltage Rating in Volts | 115.0 AC AT SEA LEVEL |
| Contact Voltage Rating in Volts | 28.0 DC AT SEA LEVEL |
| Operating Temp Range | -65.0 TO 125.0 CELSIUS DEGC |
| Thread Class | 2A SINGLE MOUNTING FACILITY A |
| Test Data Document | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Switch Actuator Positioning Increment | 30.0 DEGREES SINGLE ACTUATOR |
| Switch Actuator Indexing Position Quantity | 6 SINGLE ACTUATOR |
| Thread Series Designator | UNEF SINGLE MOUNTING FACILITY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MIL-DTL-3786/28 | 4/1 Identification reference U.S. Government activity |
| M3786/28-040 | 5/9 Secondary reference U.S. Government activity |
| M3786/28-1016 | 2/2 Government specification standardization U.S. Government activity |
| M3786/28-CFE | 5/9 Secondary reference U.S. Government activity |
| MIL-S-3786/28 | 5/9 Secondary reference U.S. Government activity |
NSN 5930-01-034-4886 is a Switch,rotary, classified under FSC 5930, Switches. Status: active.
11 possible matches (shared part number, not a government interchangeability claim): 5930-01-044-4031, 5930-01-066-9458, 5930-01-067-9872. Verify interchangeability with system specifications before substitution.
Key specifications for 5930-01-034-4886: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Nonturn Device Radius: 0.375 INCHES NOMINAL AT 3:00 OCLOCK IN. 29 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.