The Switch,rotary, cataloged under National Stock Number 5930-00-937-9984, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-00-937-9984 |
| Primary Part Number | 10516592 |
| Item Name | Switch,rotary |
| FSC / FSG | 5930 / 59 — Switches |
| Manufacturer | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate |
| Status | ACTIVE |
| Shaft Type | ROUND, FLATTED SINGLE ACTUATOR |
| Shaft Diameter | 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Switch Contact Basic Design | NONPILE-UP SYMMETRICAL |
| Terminal Type | TAB, SOLDER LUG |
| Overall Diameter | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN |
| First Flat Length | 0.250 INCHES NOMINAL SINGLE ACTUATOR IN |
| Precious Material | RHODIUM AND SILVER |
| Contact Load Current Rating | 1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| Mounting Method | THREADED BUSHING SINGLE MOUNTING FACILITY |
| Thread Length | 0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY IN |
| Pole Quantity | 2 SINGLE SECTION REAR |
| Style Designator | MINIATURE, BUSHING MOUNT |
| Individual Section Quantity | 1 |
| Nominal Thread Size | 0.250 INCHES SINGLE MOUNTING FACILITY IN |
| Shaft Length | 0.625 INCHES NOMINAL SINGLE ACTUATOR IN |
| Switch Actuator Stop Device Type | FIXED STOP SINGLE ACTUATOR |
| Contact Switching Action | MAKES BEFORE BREAKS SINGLE SECTION REAR |
| Contact Voltage Rating in Volts | 0.250 AC AT SEA LEVEL |
| Precious Material and Location | WIPERS RHODIUM AND CONTACTS SILVER |
| Operating Temp Range | -55.0 TO 125.0 CELSIUS DEGC |
| Thread Class | 2A SINGLE MOUNTING FACILITY A |
| Switch Actuator Positioning Increment | 36.0 DEGREES SINGLE ACTUATOR |
| Switch Actuator Indexing Position Quantity | 3 SINGLE ACTUATOR |
| Thread Series Designator | UNF SINGLE MOUNTING FACILITY |
| Flat Height | 0.094 INCHES NOMINAL SINGLE ACTUATOR IN |
| Throw Quantity | 3 SINGLE SECTION REAR |
| Hazardous Locations/environmental Protection | EXPLOSION PROOF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 10516592 PRIMARY | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA) |
| SPEC11152 | Shallco, Inc (USA) |
| 28-GM-3MODSHAFT | Shallco, Inc (USA) |
| Reference | Meaning |
|---|---|
| SPEC11152 | 5/9 Secondary reference Meggitt (new Hampshire), Inc |
| 5930009379984 | 5/9 Secondary reference E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
| 28-GM-3MODSHAFT | 5/9 Secondary reference Meggitt (new Hampshire), Inc |
NSN 5930-00-937-9984 is a Switch,rotary, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate, classified under FSC 5930, Switches. Status: active.
NSN 5930-00-937-9984 has 3 manufacturer part numbers on file: 10516592 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate), SPEC11152 (Shallco, Inc), 28-GM-3MODSHAFT (Shallco, Inc).
Key specifications for 10516592: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Terminal Type: TAB, SOLDER LUG. 27 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.